Colour System Set, Mode, About Ntsc Playback | JVC HR-J711EU

12EN

INFORMATIONONCOLOURSYSTEM

Colour System Set

1 2 3

2

4 5 6

7 8 9

0

4

1

?

OK

MENU

NOTES:

About NTSC Playback

●Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.

●The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●The counter and tape remaining time readings will be incorrect.

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

●Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.

You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM* signals on this recorder. Follow the procedure below to select the appropriate colour system.

*SECAM signals will be recorded as MESECAM on this recorder; MESECAM is the designation for tapes with SECAM signals that have been recorded on a MESECAM-compatible PAL video cassette recorder.

TURN ON THE RECORDER

1 Press					.
1 Press					.
	ACCESS MAIN MENU
	SCREEN
2 Press MENU.
	ACCESS MODE SET SCREEN
Press %Þ to move the						MAIN MENU
	highlight bar (pointer) to
3 "MODE SET", then press						MODE SET
3 "MODE SET", then press						AUTO CH SET
	OK or #.					MANUAL CH SET
						INITIAL SET

						[5°] =
						[MENU] : EXIT

	SELECT COLOUR SYSTEM
	MODE
Press %Þ to move the						MODE SET
	highlight bar (pointer) to					PREVIOUS PAGE		AV2
4 "COLOUR SYSTEM", then						AV2 SELECT		AV2
4 "COLOUR SYSTEM", then						COLOUR SYSTEM PAL/NTSC
	press OK or #to select the
	appropriate colour system.

						[5°] =
						[MENU] : EXIT

a- PAL/NTSC: To record PAL signals, or play back a PAL or NTSC tape.

b- MESECAM: To record SECAM signals, or play back a MESECAM tape.

RETURN TO NORMAL

SCREEN

5 Press MENU.

Image 12

JVC HR-J711EU Colour System Set, Mode, About Ntsc Playback, Counter and tape remaining time readings will be incorrect

Contents

HR-J711EU HR-J668EU Safety Precautions Safety FirstFor Italy Do not place the recorder Check Contents Basic ConnectionsSituate Recorder Connect Recorder to Mains Auto Set Up EN Initial SettingsIf you are referring to the front display panel If you are referring to the on-screen display Language Code Via an RF cable only RF connectionYour TV to the Video Channel. Refer to This Preset Download ENU If both auto channel set and auto clock set have failed Language for the on-screen displayJust Clock Just Clock on Language Access Main Menu Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Return to Normal Screen Power Save Mode TV Auto Power On Link FunctionsLI NK NexTView Link Colour System Set ModeAbout Ntsc Playback Counter and tape remaining time readings will be incorrect Basic Playback Load a CassettePoint Start Playback Playback Features PlaybackActivate HIGH-SPEED Search Adjust Tracking Override Automatic TrackingManually Return to Automatic Access Mode SET Screen Select Picture Control SET ModeEN Playback Basic Recording Recording Features Receiving Stereo Bilingual ProgrammesTo Record Stereo And Bilingual Programmes A2 To Record Nicam Stereo And Bilingual Programmes S.T. Picture System EN RecordingPreparation S.T., then press OK or Recording PlaybackOr press Record on the recorder Timer Programming EN Timer Recording Timer Warning Satellite Tuner UsersPress SP/LP Express Timer Programming Before performing Express Timer ProgrammingStart Time Time SET VPS/PDC Mode Timer ModeEngage RECORDER’S VPS/PDC Recording Check, Cancel And Replace Programmes Press ä TimerPress Again to check More information. Each Time you press Next programmes Auto SP→LP Timer Auto Timer Prog REC Mode Automatic Satellite Programme RecordingBefore performing the following steps SET Edit Mode Edit From a CamcorderMake Connections SET RECORDER’S Input Input Mode Edit To Or From Another Video RecorderSET Recording DECK’S Start Source Player AV2 Select Setting RecorderRecorder Player Connection To Satellite Tuner EN System ConnectionsSatellite Tuner Unit Back of TV Connector Scart DecoderSet AV2 Select to AV2. pg Connecting Using a Decoder Select Input ModeConnect Decoder SET Tuner Connecting Using a Stereo System Speaker Television Mains outlet Access Auto CH SET Tuner SetEN Subsi Diary Sett Ings Auto Channel Set Perform Auto Channel SET View Confirmation Screen SU Bsidiary Settings Storing Channels Manually When Receiving a Scrambled Broadcast Delete a ChannelChange Station Channel Position Press %Þ @ #until the item you want to move begins Access Manual Switch StationsChannel SET Screen Select NEW Station TV Station And ID List Access Manual Channel SET Screen Perform TuningFine-Tuning Channels Already Stored Select Channel to FINE-TUNE Access Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET RF Output System Clock Set Turn the Recorder onSET Date and Time Default setting is OFF. Set as desired by pressing Recorder is preset to receive clock settingSET Just Clock Channel Position Showview Setup NumberEnter Receiving Channel Position Number Guide Program Number Set Troubleshooting EN Timer Recording Roubleshooting Ä remain lit on the display panel. Is there Problem? Quest Ions and Answers EN Index Front View J668EU Rear View EN Index VCR, TV Prog +/-,TV +/-, TV Muting PAL-type colour signal and Ccir Provided accessoriesSpeci Fications EMO Memo Auto Set Up referring to the display panel Ex. Francais is selected for Belgium