JVC HR-J765EK setup guide Storing Channels Manually

The blueback screen and the programme currently being broadcast by the selected channel appear alternately for 8 seconds each.

[0–9] : SELECT

[°°] : CURSOR +=

: OK [MENU] : EXIT

34SUBSIDIARYSETTINGS(cont.)

Storing Channels Manually

NUMBER

1

1 2 3

4 5 6

7 8 9

0

?

2

4

To store channels that were not stored during Auto Set Up (☞ pg. 6) or Auto Channel Set (☞ pg. 32).

ACCESS MAIN MENU SCREEN

1 Press MENU.
	ACCESS CONFIRMATION
	SCREEN
	Press %Þ to move the highlight bar (pointer) to
	“MANUAL CH SET”, then press OK or .#The Confir-
2 mation screen appears.
	SELECT POSITION
	Press %Þ @ #until an	(Ex.) To store in position 6.
	open position in which	PR	CH	ID	PR	CH ID
3 you want to store a
		01	26	BBC1	08	– – – –

ENU	OK
	3

ATTENTION

Guide Program numbers are not set when channels are stored manually. If an attempt is made at timer program- ming with VIDEO Plus+ in this state, the “GUIDE PROG SET” screen appears; set the Guide Program numbers on this screen. ☞ “ATTENTION – Regarding Guide Program Number Set” on pg. 13.

Or perform “Guide Program Number Set” (☞ pg. 40).

	channel begins blinking,	02			33	BBC2		09	– – – –
	then press OK. The	03			23	ITV		10	– – – –
		04			30	CH4		11	– – – –
	Manual Channel Set	05			37	CH5		12	– – – –
	screen appears.		06			– – – –		13	– – – –
		07				– – – –		14	– – – –
				[5°5		5]
				=		: EDIT
				= [X] : DELETE
				[MENU] : EXIT
		The blueback screen and the
		programme currently being
		broadcast by the selected channel
		appear alternately for 8 seconds
		each.
4	INPUT CHANNEL
	Press the NUMBER keys to
	input the channel number
	you want to store.			PR	CH		ID	FINE
				06	CH21		––––	+/–
	● To input the registered
	station name (ID – ☞ pg.

37), press #until "– – – –

" (ID setting) begins blinking, then press %Þ.

● For fine tuning adjustment, press # until "+/–" begins blinking, then press %Þ.

While tuning, “+” or “–” appears.

	ENTER NEW CHANNEL
5	INFORMATION
	Press OK and the Confirmation screen appears.
	● Repeat steps 3 through 5 as necessary.
6	CLOSE CONFIRMATION SCREEN
	Press MENU.
	● To change positions, see "Change Station Preset
	Position" (☞ pg. 35).
	● If you wish to set station names other than the ones
	registered in your recorder, ☞ "Set Stations (B)" on
	page 36.