December 22, 2001 5:03 pm Page 4
—4—
Master Page: Right
After the 1 is pressed for the first time to power on the recorder,
the recorder starts Auto Set Up or Preset Download.
A
TTENTION:
If you have connected the recorder to a TV offering T-V Link via a
fully-wired 21-pin SCART cable and if the TV is turned on, the
recorder automatically performs the Preset Download even if you
perform Auto Set Up.
Before starting:
●Perform “Basic Connections” (墌3).
●Set the TV to its AV mode (with AV connection) or UHF
channel36 (with RF connection).
Auto Set Up

— Auto Channel Set/Auto Clock Set*/Auto Guide Program

Number Set*

* If you select a country in Central or Eastern Europe, set the clock
and Guide Program Number manually.
ATurn on recorder
Press 1. The Country Set screen appears
on the screen.
●If you have connected your TV to the
recorder with RF connection and the on-
screen display appearing on UHF
channel36 looks distorted, perform
“Video Channel Set” (墌16).
BSelect your country
Press rt to place the pointer next to your country, then press OK.
The language is automatically selected for the on-screen display
depending on the country you have selected. The AUTO SET/T-V
LINK screen appears.
●If you select BELGIUM or SUISSE and press OK, the Language
Set screen appears. Press rt to place the pointer next to the
desired language, then press OK. Go to step3
33
3.
●If you select MAGYARORSZÁG, CESKÁ
REPUBLIKA, POLSKA or OTHER
EASTERN EUROPE, press OK. The Clock
Set screen appears. Press rt until the
desired time appears, then press OK or
e. Set the date and year in the same way.
(Holding rt changes the time in
30-minute intervals, or changes the date
in 15-day intervals.) Then press MENU and go to step3
33
3.
CPerform Auto Set Up
Press rt to place the pointer next to
“AUTO SET” and press OK or e.
●If you are using the display panel, press
rt to select “Auto” and press OK or e.
●Do NOT press any button during Auto Set Up. When the Auto
Set Up is completed, “SCAN COMPLETED” appears for about
5seconds, then the normal screen appears.
DCheck results
If both Auto Channel Set and Clock Set
have been performed successfully, the
correct current time is displayed.
Turn on the TV and select its video channel or AV mode. Then
make sure that all necessary stations have been stored in the
recorder’s memory by using the PR button(s).
If Auto Channel Set has succeeded but
Clock Set has not, “1” is displayed.
ATurn on the TV and select its video
channel or AV mode. Then make sure that all necessary stations
have been stored in the recorder’s memory by using the PR
button(s).
BPerform “Clock Set” (墌13).
If both Auto Channel Set and Clock Set
have failed, “––:– –” is displayed.
Make sure the cables are connected
properly. Turn off the recorder once, then turn the recorder back
on again. The Country Set screen appears on the screen. Perform
Auto Set Up or Preset Download again.
Preset Download

— Auto Channel Set by downloading preset data from TV/

Auto Clock Set*/Auto Guide Program Number Set*

* If you select a country in Central or Eastern Europe, set the clock
and Guide Program Number manually.
A
TTENTION:
You can use this function only with a TV offering T-V Link, etc.* Be
sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offeri ng T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired 21-
pin SCART cable. The degree of compatibility and available functions
may differ by system.
Before starting:
Perform steps 1
11
1–2
22
2 of “Auto Set Up”.
APerform Preset Download
Press rt to place the pointer next to “T-V
LINK” and press OK or e.
●If you are using the display panel, press
rt to select “CH– –” and press OK or
e.
●Do NOT press any button during Preset Download. When
Preset Download is completed, “COMPLETED” appears for
about 5seconds, then the normal screen appears.
BCheck results
Perform step 4
44
4 of “Auto Set Up”.
CSet video channel to off
Perform “Video Channel Set” (墌16).
NOTES:
●Depending on the area, the recorder cannot perform Auto Set
Up or Preset Download properly.
●In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the recorder can perform neither Auto
Clock Set nor Auto Guide Program Number Set.
●If you have moved to a different area, perform “Video Channel
Set” (墌16) (with RF connection), “Tuner Set” (墌13) and
“Clock Set” (墌13) as required.
●If a new station starts broadcasting in your area, perform “Tuner
Set” (墌13) and, if necessary, “Video Channel Set” (墌16).
Language Set
You can change the language setting manually as required.
AAccess Main Menu screen, then Auto

Channel Set screen

Press MENU. Press rt to place the
pointer next to “AUTO CH SET”, then press
OK or e.
BSelect your country
Press rt to place the pointer next to your country, then press OK
or e.
CSelect language
Press rt to place the pointer next to the desired language.
●You do not have to press OK; pressing OK enters AUTO SET/T-V
LINK screen.
DReturn to normal screen
Press MENU.
Initial Settings
HR-J790EU-001EN.fm Page 4 Saturday, December 22, 2001 5:03 PM