JVC HR-S29U manual Edit To Or From Another, 48 EN

48 EN EDITING (cont.)

Edit To Or

From Another

VCR

Connection
Ex. When using this VCR as the playback VCR
	This VCR (for playback)
			REMOTE
			PAUSE/ IN OUT ANTENNA IN
		CABLE	AV
			COMPU
		BOX	-LINK
	IN	OUT	AUDIO
S			VHF/UHF
V			TV OUT
I			VIDEO
D
E
O
To S VIDEO			To AUDIO/
OUT			VIDEO OUT
S-video cable			Audio/video
(supplied)
			cable (not
			supplied)
To S-video			To Audio/
Input			video Input
Another VCR (for recording)

You can use your VCR as the playback or recording VCR.

●Refer also to the other VCR’s instruction manual for

1connection and its operations.

Make connections

Connect an audio/video cable between the playback VCR’s audio/video output connectors and the recording VCR’s audio/video input connectors.

●When using this VCR as the recording VCR, connect this VCR’s audio/video input connectors to the audio/video output connectors on the other VCR.

If the playback VCR is monaural, connect the audio output connector on the playback VCR to the left audio input connector on this VCR.

2Load cassettes

Insert the playback cassette into the playback VCR and the cassette to be recorded on into the

3recording VCR.

Select input mode on recording VCR

Select the correct external input on the other VCR.

●On this VCR (when using this VCR as the recording VCR);

Select “L-1” — when connecting the other VCR to the audio/video input connectors on the rear panel;

Select “F-1” — when connecting the other VCR to the audio/video input connectors on the front panel.

4Press the Number key "0 (AUX)" or CH +/–.

Select video input terminal on recording

VCR

When using this VCR as the recording VCR, follow the procedure described on pages 39 and 43.

When using S VIDEO terminal, set “REAR AUX INPUT” to “S-VIDEO”.

When using VIDEO terminal, set “REAR AUX

5INPUT” to “VIDEO”.

Select edit mode

Set the edit mode to “ON” for the VCRs if such a mode is equipped.

●On this VCR, set “PICTURE CONTROL” to

“EDIT” by following the procedure described

6on pages 39 and 40.

Start playback

Press PLAY ( 3 ) on the playback VCR.

NOTE:

If the playback VCR is equipped with a superimpose/ OSD disable feature then set it to “OFF” before starting

7playback ( pg. 39 and 40).

Start recording

Press REC ( ¶ ) on the recording VCR.

NOTE:

Be sure to select “AUTO” for “PICTURE CONTROL” (or

“NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes ( pg. 39 and 40).