JVC HR-S7611EU, HR-S7600EU specifications SET Just Clock, Start Clock Operation

1– –:– –

2

1 2 3

45 6

78 9

0

1

MENU

2

3

4

4

3

6

7

OK 8

EN57

SET JUST CLOCK

The default setting is “OFF”. Set as desired by pressing %Þ, then press OK or #.

●For the Just clock function, ☞ "Just Clock" on page 56.

●If you set to “OFF”, you can disregard the next step as you won’t be able to receive regular clock adjustments.

SET CLOCK DATA SOURCE CHANNEL POSITION

The recorder is preset to receive clock setting and adjustment data from channel position 1. Press %Þto set the channel position to the number representing the station transmitting clock setting data, then press OK or #.

START CLOCK OPERATION

Press MENU.

￿

NOTES:

●Just Clock (when set to "ON") adjusts the recorder's built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when . . .

–the recorder’s power is on.

–the recorder is in the Timer mode.

–a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

–the recorder is in the Auto Satellite Prog Rec mode (☞ pg. 33).

–the recorder is in the Power Save mode (☞ pg. 12).

●If Just Clock is set to "ON", the recorder’s clock is automati- cally adjusted at the start/end of Summer Time.

●Just Clock may not function properly depending on the reception condition.