Page 11 May 2, 2003 10:12 am
—11 —
Timer Recording
Up to 8timer recording programs can be made using Express
timer programing method as far as a year in advance. Remember,
the clock must be set before you can program the timer.
NOTES:
●If all the 8 programs have already been set, “PROGRAM FULL”
appears on the TV screen.
●After timer recording is completed, the VCR turns off
automatically.
●You can program the timer recording while a regular recording
is in progress; the menu screens will not be recorded.
●If the tape reaches its end during timer recording, the recording
stops and “
#“, “
䡬” and “
$” on the display panel blink. Press
TIMER to disengage timer, then press STOP/EJECT (0) on
the VCR to eject the cassette or press POWER 1 then press
REW (3) to rewind the tape.

Express Timer Programing

Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
APress PROG. on the Remote to access the Program screen.
BPress START / (Number keys “1”
and/or “4”), STOP / (Number
keys “2” and/or “5”), DATE /
(Number keys “3” and/or “6”) or
CH / repeatedly to enter the start
time, stop time, date or channel.
●Press and hold START / or
STOP / to increase the time in
30-minute intervals.
●To set the tape speed, press SP/EP.
●To timer-record daily (Monday–Friday) or weekly serials,
press DAILY (M-F) (Number key “8”) or WEEKLY (Number
key “9”). Pressing the button again makes the “DAILY” or
“WEEKLY” display disappear.
CPress OK or PROG..
●If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”
appears, see “Program overlap warning display” (墌pg.12).
DPress TIMER. The VCR turns off automatically and “#” is
displayed on the display panel.

To use the VCR while it is in timer

recording standby mode

Press TIMER, then press 1. After you use the VCR, press TIMER
again to put the VCR into timer recording standby mode.

Checking, canceling or changing

program settings

ADisengage timer
Press TIMER, then press 1.
●When “AUTO TIMER” (墌pg.13) is set to “ON”, you do not
have to press TIMER.
BAccess Program Check screen
Press PROG. CHECK.
CAccess Program screen
Press PROG. CHECK again. Each time you
press PROG. CHECK, the next
program’s
Program screen appears.
DCancel or change program setting
To cancel a program, press CANCEL when the Program screen
you do not want is shown.
To change a program, press the appropriate button: START /
(Number keys “1” and/or “4”), STOP / (Number keys “2”
and/or “5”), DATE / (Number keys “3” and/or “6”),
CH / , DAILY (M-F) (Number key “8”), WEEKLY (Number key
“9”) and/or SP/EP when the Program screen on which you want to
make changes is shown.
EReturn to normal screen
Press PROG. CHECK repeatedly until no Program screen is
shown.
FReengage timer recording standby mode
Press TIMER. The VCR turns off automatically and “#” is
displayed on the display panel.
●When “AUTO TIMER” (墌pg.13) is set to “ON”, the timer
recording standby mode automatically resumes when you turn
off the VCR.
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
TIMER
PROGRAM 1
START STOP
– –:– –AM – –:– –AM
DATE CH
– –/– –/– – – – – SP
PRESS (+/–, SP/EP, 8=DAILY
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END
PRESS (CHECK) TO NEXT
PR START STOP CH DATE
1 8:00P 10:00 12 12/24
2 10:00A 10:45 40 12/25
3 11:30P 1:00 125 12/25
4
5
6
7
8
PROGRAM 1
START STOP
8:00 PM 10:00 PM
DATE CH
12/24/03 12 SP
PRESS (CANCEL) TO CANCEL
PRESS (CHECK) TO NEXT
HR-S8010UM-EN.fm Page 11 Friday, May 2, 2003 10:12 AM