TroubleshootingTips Operating Instructions Installation Instructions SafetyInstructions
Program the Timer
Fig. 8
Solid State Timer
TIME/DAY
REGENERATION
TIME
REGENERATION
DAY
SET/CLEAR
TOUCH | VACATION ON/OFF | |
REGENERATE NOW | ||
HOLD | ||
|
SmartWater Softening System
Set the timer:
When the transformer is plugged into electrical outlet, 12:00AM, SUnday will begin to flash in the time display.
Set the time of day and present day of week as follows:
A. Set the time of day:
| Press the TIME/DAY button once and the hour display will begin to flash. |
1 | |
| Press the SET/CLEAR button until the present hour of the day shows in the display. Be sure AM for |
2 | |
| morning hours, or PM for afternoon and evening hours shows. |
| NOTE: Press SET/CLEAR button and quickly release to move the hour display ahead 1 at a time to the |
| correct hour. Or, hold the SET/CLEAR button to move the display ahead 2 hours each second, to the |
| correct hour. |
| Press the TIME/DAY button once to steady the hour display, and minutes begin to flash. |
3 | |
| Repeat Step A. 2 to set the correct minutes. |
| Press the TIME/DAY button again to steady the minute display (day will begin flashing). Fig. 9 shows |
4 | |
| the timer set at 3:30 PM. |
B. Set the present day of the week:
1 Press the SET/CLEAR button to set the present day of the week in the display.
NOTE: Press SET/CLEAR button and quickly release to move the day display 1 at a time. Or hold the SET/CLEAR button to move the day display ahead 2 days each second.
2 Press the TIME/DAY button again to steady the entire display. Fig. 9 shows the timer set at TUesday.
No other settings are needed after installing your water softener. The softener is factory set to regenerate every Monday, Wednesday and Saturday (beginning at 2:00 AM). For most families, this gives enough soft water for their needs. However, if you want the softener to regenerate at a different time, or on different days, or to set for the most efficiency, see About the Water Softener System section.
CustomerService
Fig. 9 EXAMPLE: This drawing shows the
present time of day at 3:30 PM, |
| E |
| E |
|
and the present day on TUesday. | PM |
|
| ||
|
|
| |||
|
| TU |
| ||
|
|
| |||
10See the Operating section for other timer controls and features.
TIME/DAY
REGENERATION
TIME
REGENERATION
DAY
SET/CLEAR
TOUCH | VACATION ON/OFF | ||
REGENERATE NOW | |||
HOLD |
| ||
|
| ||
