SafetyInstructions
Installation instructions.
Typical Installation Illustration
Fig 1. Soft water | MAIN WA |
| TER |
| PIPE |
Hard water
Operating Instructions Installation Instructions
24V transformer
Salt hole cover removed
SALT 
GOES HERE 
Brinewell 
Hard water to outside faucets
Installation nut (2)
Copper tube, 3/4″ (2)
Washer (2)
Bypass Valve
• Pull out for service
• Push in for bypass
NOTE: Threads on the bypass valve are 1″ male pipe. If 1″
pipes are needed, do not use the
INLETcopper tubes and nuts included. Buy adapters and plumb directly to the 1″ threads.
NOTE: See Drain Hose
Connections section.
Use if water supply flows from the left.
Include single or
Hard water
Soft water
From softener outlet
To softener inlet
TroubleshootingTips
Optional 3-Valve Bypass Installation Illustration
Adapters for this installation are not supplied with the softener. To order these adapters, call GE Parts 800.626.2000.
Fig 2.
Soft water | Bypass valve |
MAIN WA | Hard water to outside faucets |
| |
TER |
|
| PIPE | Hard water |
|
CustomerService
24V transformer
6
Inlet valve
Outlet valve
For soft water service:
• Open the inlet and outlet valves
• Close the bypass valve
For bypass hard water:
• Close the inlet and outlet valves
• Open the bypass valve
Nut (2)
Copper tube, 3/4″ (2)
Washer (2)
Installation adapter (2)
INLET
NOTE: Threads on the installation adapters are 1″ male pipe. If 1″ pipes are needed, do not use the copper tubes and nuts included. Buy adapters and plumb directly to the 1″ threads.
Hard water
Soft water
From softener outlet
To softener inlet
Use if water supply flows from the left.
Include single or
