Page 12 May 2, 2003 10:12 am
—12 —

Program overlap warning display

If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”
appears, you have another program overlapping the program you
have just made. The Program Check screen appears and
conflicting programs will start blinking.
Example:
Program1 (you have just made) and Program 4 overlap each
other
ASelect program to modify
Press rt, then press e.
●You can only select one of the
overlapping programs.
●If you do not mind this overlap, press
PROG. to finish the timer program
setting. The program starting earlier or
program with the lower program number will be recorded.
BCancel or change program setting
To cancel a program, press CANCEL when
the Program screen you do not want is
shown.
To change a program, press the
appropriate button: START / (Number
keys “1” and/or “4”), STOP /
(Number keys “2” and/or “5”), DATE / (Number keys “3”
and/or “6”), CH / and/or SP/EP when the Program screen on
which you want to make changes is shown, then press OK.
●If the overlap is not yet solved, the conflicting programs will be
shown on the Program check screen. Repeat the above steps
again.
Other Functions

Checking tape position

When you change the VCR operation
mode from the stop mode to fast forward
or rewind mode, or when you perform an
Index Search or Instant Review, the tape
position indicator appears.
The position of “q” in relation to “B”
(Beginning) or “E” (End) shows you where
you are on the tape.
●Set “SUPERIMPOSE” to “ON”. (墌pg.13)

Changing display information

Each time you press DISPLAY, the display panel
shows the channel number and the clock time
alternatively.
●You can change display in the stop, recording or
during picture search.
●When “SUPERIMPOSE” is set to “ON”
(墌pg.13) and DISPLAY on the Remote is pressed, time
counter will appear on the TV screen. To reset the time counter,
press C. RESET on the Remote.

Timer warning display

A warning appears on the TV screen to tell
you that the timer-recording is to start in
5 minutes if you are not in the timer
recording standby mode at that time. Press
TIMER to put the VCR into timer recording
standby mode. To clear the display, press
CANCEL on the Remote.

Tape Remaining Time

Press DISPLAY to display the tape remaining time on the screen.
NOTES:
●Set “SUPERIMPOSE” to “ON” (墌pg.13) to display the
indication on the screen.
●Depending on the type of tape used, the tape remaining time
may not appear right away, or is not correct. “––:––“ may
sometimes appear, or the display may blink on occasion.
( , ), THEN ( ) (PROG.) : END
PR START STOP CH DATE
1 8:00P 10:00 12 12/24
210:00A 10:45 40 12/25
311:30P 1:00 125 12/25
49:00P 10:00 10 12/24
5
6
7
8
PROGRAM NOT COMPLETED
PROGRAM OVERLAP
( , ), THEN ( ) (PROG.) : END
PR START STOP CH DATE
1 8:00P 10:00 12 12/24
210:00A 10:45 40 12/25
311:30P 1:00 125 12/25
4 9:00P 10:00 10 12/24
5
6
7
8
PROGRAM 4
START STOP
9:00PM 10:00PM
DATE CH
12/24/03 10 SP
WED
PRESS (CANCEL) TO CANCEL
PRESS (OK) TO CONFIRM
PRESS (PROG.) TO END
B+++E
REMAIN 1:00
COUNT 1:23:45
–WARNING–
TIMER RECORDING
TO START SOON
(CANCEL)
– Timer Recording –
HR-S8010UM-EN.fm Page 12 Friday, May 2, 2003 10:12 AM