Manuals / Brands / TV and Video / VCR / JVC / TV and Video / VCR

JVC HR-S8965EK Finding Specific Scenes, REVIEW, REVIEW, timer mode, finding first index marker Press Dor Eonce. The

1 76

Download 76 pages, 1.63 Mb

38advanced features

Finding Specific Scenes

Skip Search

During playback, press 3up to 4 times. Each press of the 3button will cause the VCR to go into fast-motion playback for a period of 30 seconds. Normal playback resumes automatically.

• To return to normal playback during a Skip Search, press ..

Index Search

Each time you record a programme, this VCR puts an index marker at the point that you started recording. If O.S.D. is set to ON ( pg. 55), ‘MARK’ blinks on the screen while an index marker is being marked. The VCR can fast wind to any one of nine index markers in either direction from the point that you stop the tape.

NOTE:

• Before starting, make sure the recorder is in the Stop mode.

finding first index marker Press Dor Eonce. The

]5

TV screen will display [1 or ]1 and the VCR begins searching through the tape in the corresponding direction for the first index marker from its current position.

finding subsequent index markers Press Dor Ethe required number of times (e.g. five). The TV screen will display [5 or ]5 and the VCR begins searching through the tape in the corresponding direction for the fifth index marker from its current position.

Instant Review

The display panel tells you how many timer-recorded

programmes are on the tape. If you have three, the REVIEW indicator and ‘3’ blink on the display panel. To watch the first of these three programmes, press REVIEW three times. You can

move back up to nine programmes from your current position. Pressing the REVIEW button causes the VCR to turn on, rewind to the beginning of the the last timer-recorded programme and begin playback.

If you press the REVIEW button one time, the front display panel will display “-1” and start rewinding. The number will be changed whenever you press REVIEW up to “-9”.

timer mode Instant Review will not work while the VCR is in Timer mode.

auto satellite programme recording If Auto Satellite Programme Recording has been used to record the programmes, the number of recorded programmes will not be displayed on the display panel.

Contents

Page Safety Precautions If in doubt — consult a competent electrician TO MOBILE PHONE USERS: ON PLACING THE RECORDER: Some Do’s And Don’ts ABOVE ALL Subsidiary Information Page Diagram Key Welcome to JVC Page scart and rf GETTING EVERYTHING READY (continued) notes Page Three-StepQuick Start FINISH AUTO SETUP oops START PRESET DOWNLOAD rf and scart connection SET THE VIDEO CHANNEL TO OFF IMPORTANT re-running setup manual station setting Playback Features VIDEO Plus+® Timer Programming Playback Page Playback Features Page Recording non-standard tapes Page VIDEO Plus +® Timer Programming satellite receiver users Page Express Timer Programming Page 24H ExpressTimer Page Page Page Picture Quality select video stabilizer mode Move the highlight bar to Recording AccordingTo TapeType To record in S-VHS: To record in S-VHSET on a VHS cassette: To record in VHS: To record in VHS on an S-VHScassette: The B.E.S.T Picture System Sound Modes Finding Specific Scenes Programme Navigation When inserting a cassette with the record safety tab intact When inserting a cassette whose record safety tab has been removed Programme Navigation Screen Page Page T-VLink Functions get to the mode set screen Press m. Move select direct rec mode Move the highlight Satellite Receiver Control Settings turn on satellite receiver get to the sat control set screen Move the highlight bar to SAT CONTROL enter satellite receiver’s brand Press the select satellite receiver’s preset position for testing If the satellite receiver’s channel number has not been changed correctly Auto Satellite programme satellite receiver l-2 select mode engage vcr in auto mode connectors Editing FOR L-2SELECT FOR L-2INPUT If another VCR is compatible with Y/C signal set vcr’s input mode set edit mode start source vcr Engage its PLAY mode start recording vcr Engage its RECORD mode Page Page Audio Dubbing Page Insert Editing Page Other Functions VPS/PDC MARK HIFI NORM enable/disable auto timer Select AUTO TIMER using the start repeat playback stop playback play power off timer standby Connection to a Stereo System Video Channel Set Tuner Set Page get to the confirmation screen select character enter new character select channel delete channel Press select item Use the select new position Use the save new details Press Screen will appear again Page Clock Set Question and Answers Troubleshooting CORRECTIVE ACTION RECORDING TIMER RECORDING TIMER RECORDING (cont.) OTHER PROBLEMS List of Terms s p e c i f i c a t i o n s g e n e r a l v i d e o / a u d i o t u n e r / t i m e r a c c e s s o r i e s