Checking, cancelling or changing programme settings

ADisengage timer recording standby mode

Press #, then press 1.

●When “AUTO TIMER” is set to “ON” ( 12), press only 1.

BAccess Program Check screen

Press ".

CAccess Program screen

Press " again. Each time you press ", the next programme’s screen appears.

DCancel or change programme setting

To cancel a programme, press &.

To change a programme, press the

appropriate button: START

/

(number

 

keys “1” and/or “4”), STOP

/

(number

 

 

keys “2” and/or “5”), DATE

/

(number keys “3” and/or “6”),

DAILY (number key “8”), WEEKLY (number key “9”) and/or PR /.

EReturn to normal screen

Press " repeatedly until no Program screen is shown.

FRe-engage timer recording standby mode

Press #. The recorder turns off automatically and “#” is displayed on the display panel.

●When “AUTO TIMER” is set to “ON” ( 12), the timer recording standby mode automatically resumes when you turn off the recorder.

Program overlap warning display

If “PROGRAM OVERLAPPED” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking.

PROGRAM OVERLAPPED

[PROG] : EXIT

Example:

Program 1 (you have just made) and Program 4 overlap each other

ASelect program to modify

Press rt, then press OK or e.

 

 

 

 

 

● You can only select one of the

 

 

 

 

 

overlapping programs.

 

 

 

 

 

 

 

 

 

 

● If you do not mind this overlap, press

 

 

 

 

 

PROG to finish the timer program

 

 

 

 

 

setting. The program starting earlier or

 

 

 

 

 

 

 

 

[PROG] : EXIT

 

 

 

program with the lower program

 

 

 

 

 

number will be recorded.

 

 

 

 

 

BCancel or change program setting

To cancel a program, press & when the Program screen you do not want is shown.

To change a program, press the appropriate button: START / (number keys “1” and/or “4”),

STOP /

(number keys “2” and/or

“5”), DATE

/ (number keys “3” and/or “6”), and/or PR /

when the Program screen on which you want to make changes is shown, then press OK or e.

●If the overlap is not yet solved, the conflicting programs will be shown on the Program check screen. Repeat the above steps again.

Timer warning display

A warning appears on the TV screen to tell you that the timer-recording is to start in 5 minutes if you’re not in the Timer mode at that time. The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press & on the remote control.

— 10 —