Preset Download

—Auto Channel Set by downloading preset data from TV

ATTENTION:

You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable.

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired 21- pin SCART cable. The degree of compatibility and available functions may differ by system.

Before starting:

Perform steps 1 – 2 of “Auto Set Up” ( 5).

APerform Preset Download

Press rt to place the pointer next to “T-V

LINK” and press OK or e.

●Do NOT press any button during Preset Download. When Preset Download is completed, “COMPLETED” appears for about 5 seconds, then the normal screen appears.

BCheck results

Perform step 5 of “Auto Set Up” ( 5).

CSet video channel to off

Perform “Video Channel Set” ( 15).

NOTES:

●Depending on the area, the recorder cannot perform Auto Set Up or Preset Download properly.

●If you have moved to a different area, perform “Video Channel Set” ( 15) (with RF connection), “Tuner Set” ( 13) and “Clock Set” ( 13) as required.

●If a new station starts broadcasting in your area, perform “Tuner Set” ( 13) and, if necessary, “Video Channel Set” ( 15).

Language Set

You can change the language setting manually as required.

AAccess Main Menu screen, then AutoChannel Set screen

Press MENU. Press rt to place the pointer next to “AUTO CH SET”, then press OK or e.

B Select your country

Press rtto place the pointer next to your country, then press OK or e.

CSelect language

Press rt to place the pointer next to the desired language.

●You do not have to press OK; pressing OK enters AUTO SET/T-V LINK screen.

DReturn to normal screen

Press MENU.

T-V Link Functions

When you connect the recorder to your TV via a fully-wired

21-pin SCART cable, the following functions are available. You can use these functions only with a TV offering T-V Link, etc.* For details, refer to the instruction manual of your TV.

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired

21-pin SCART cable. The degree of compatibility and available functions may differ by system.

TV Auto Power On

The TV will turn on and be set to its AV mode automatically whenever you play a tape.

VCR Auto Standby

You can use your TV’s remote control to turn off the recorder.

Direct Rec

You can easily start recording the programme that you are watching on your TV. When you use this function, set “DIRECT REC” to “ON”. ( 12)

— 6 —