Clock Set
Turn on the recorder and the TV, and set your TV to its AV mode or video channel.
AAccess Main Menu screen, then Clock Set screen
Press MENU. Press rtto place the pointer next to “CLOCK SET”, then press OK or e.
BSet time, date and year
Press rt until the desired time appears, then press OK or e. Set the date and year in the same way.
●Holding rt changes the time in
in
CStart clock
Press MENU.
Tuner Set
Perform the following steps only if the tuner has not been set correctly by Auto Set Up or Preset Download, or if you have moved to a different area, or if a new station starts broadcasting in your area.
The recorder needs to memorise all necessary stations in channel positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area.
ATTENTION:
After you performed Auto or Manual Channel Set, please do not disconnect the recorder from the power supply (AC) immediately (in approximately 40 seconds). If the recorder is disconnected from the AC outlet or if there is a power outage within this period, some channels and station names might not be stored correctly.
Under such circumstances, please check for the stored channels and station names. If these are not stored correctly, please perform Auto or Manual Channel set again.
Auto Channel Set
AAccess Main Menu screen, then Auto Channel Set screen
Press MENU. Press rt to place the pointer next to “AUTO CH SET”, then press OK or e.
BSelect your country
Press rtto place the pointer next to your country, then press OK or e.
CSelect language
Press rt to place the pointer next to the desired language.
DPerform Auto Channel Set
Press OK twice. When Auto Channel Set is completed, “SCAN COMPLETED” is displayed on the screen for about
5 seconds, then the Confirmation screen appears.
E Return to normal screen
Press MENU.
NOTES:
●If no sound accompanies the picture or the audio sounds unnatural on some channels, select the appropriate TV system for those channels.
●To delete stations with poor reception condition, refer to “Deleting a channel” ( 14).
Manual Channel Set
Store channels that were not stored during Auto Set Up, Preset Download or Auto Channel Set.
AAccess Main Menu screen, then Confirmation screen
Press MENU. Press rt to place the pointer next to “MANUAL CH SET”, then press OK or e.
BSelect position
Press rt w e until an open channel position begins blinking, then press OK. The Manual Channel Set screen appears.
C Select band
Press rt to select CH (regular) or CC (cable), then press e.
DInput channel
Press the number keys to input the channel number you want to store. Input
“0” before any single number entries.
● You can set the desired station name (maximum of 4 letters). To input the station name, press e until the first
letter of the station name (ID) begins
blinking. Press rt to cycle through the characters, then press e. Enter the remaining characters the same way (maximum of 4). After entering all characters, press OK.
•The characters available for the station name (ID) are
•If you make a mistake, press w until the incorrect character begins blinking. Then enter the correct character by pressing rt.
NOTE:
You can only check the station name (ID) in the individual recording programme check screen.
●If you have selected a country in Central
or Eastern Europe for country setting,
“TV SYSTEM” setting appears. When you can see the picture but can hear no audio, select appropriate TV system. Press euntil D/K or B/G blinks. Then press rt to select D/K or B/G.
Major Countries/Areas | TV System |
Austria, Denmark, Finland, Holland, Italy,
Norway, Spain, Switzerland, Sweden,B/G
Germany, Egypt, Western Europe
China, Mongolia, Rumania, Bulgaria, Czech
Rep., Slovakia, Hungary, Poland, Russia,D/K Central or Eastern Europe
EStore new channel
Press OK.
●Repeat steps 2 – 5 as necessary.
FReturn to normal screen
Press MENU.
— 13 —