14initial settings

before you start

The power cord must be plugged in and connected to the VCR

The VCR must be turned on

The Remote Control must have batteries inserted

The TV set must be turned on

Video Channel Set

The VCR can send picture signals to the TV set in one of two ways; RF (ordinary cable included with this VCR) and AV (via a 21-pin SCART cable available from TV and Hi-Fi dealers). Depending upon which method you use, the VCR must have the correct method set up in order to work. The Video Channel is originally set to channel 22 but if for any reason this fails to happen, the instructions below describe how to set the Video Channel manually.

Set channel on TV

Select the vacant position 22 on you TV.

Access Video Channel Set Mode

Press obutton on the Remote Control to enter the standby mode. Press and hold PR+ or – on the VCR for more than 3 seconds.