JVC HR-VP470U manual VCR Plus+ Setup, Initial SET, then press

30ENTIMERRECORDING(cont.)

VCR Plus+ Setup

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

[VP670U]

POWER MENU

CH

OK

[VP470U]

POWER MENU

CH

OK

POWER

1 2 3

2

4 5 6

7 8 9

0 4

IMPORTANT

If you have moved to a different area or if a broadcasting station's channel number has been changed, the wrong VCR or CABLE CH number will be displayed on the VCR Plus+ program screen ( step 5 on page 29). When this happens, perform the following steps to set the correct Guide Channel number for that station.

To ensure that VCR Plus+Timer Recording operates correctly it is necessary to set the VCR Plus+ "Guide Channel Set " for each station. Please read the following information carefully.

VCR Plus+ Guide Channel Matching

The VCR Plus+ programming system assigns a VCR Plus+ "Guide Channel" to broadcast and cable TV channels. These Guide Channel numbers are also called the VCR Plus+ Channel Codes. Most TV listings have a section, usually a chart, indicating the "Guide Channel" numbers assigned to each station. For accurate VCR Plus+ programming the VCR Plus+ Guide Channel number for each station should match the channel number on which it is received in your area.

NOTES:

In many instances the VCR Plus+ Guide Channel numbers for cable and broadcast TV stations DO NOT match the channel number on which it is received by your VCR or cable box.

Check your TV listing, or contact your cable supplier for details.

Many broadcast TV stations can be viewed on cable. Check your TV listing, or contact your cable supplier for details.

1	TURN ON THE VCR
	Press POWER.
	ACCESS MAIN MENU
2	SCREEN
	Press MENU.
	ACCESS INITIAL SET
3	SCREEN
	Press CH5° or SHUTTLE	MAIN MENU
	PLUS%Þ to move the	FUNCTION SET
	highlight bar (arrow) to
		TUNER SET
	“INITIAL SET”, then press
		=INITIAL SET
	OK or SHUTTLE PLUS%.
		PRESS (5,°), THEN (OK)
		PRESS (MENU) TO END

1

3

MENU

OK

SHUTTLE PLUS