JVC HR-VP470U Access Skip Menu, Select Mode, Perform Movie, Movie Advance HR-VP670U Only

1 2 3

4 5 6

7 8 9

0

LAY 1

3

2

4

SKIP SEARCH

OK

EN25

Movie Advance

(HR-VP670U Only)

This feature helps you locate certain parts of prerecorded movies (rented or purchased) and works in two ways.

You can go to the beginning of the movie, skipping over all previews.

You can fast-motion the tape to the beginning of the next preview, so you can skip over previews one by one.

	LOAD A CASSETTE
	Insert a cassette that has a prerecorded movie (rented or
	purchased), with no safety tab, into the VCR. Playback
1 begins automatically.
	ACCESS SKIP MENU
	SCREEN
2 Press SKIP SEARCH.
3	SELECT MODE
	Press CH5° or SHUTTLE	SKIP MENU
	PLUS%Þ to move the

SHUTTLE PLUS

ATTENTION

Movie Advance works only on prerecorded cassettes that have been recorded in the SP mode, and have no safety tab. If the VCR detects the EP mode after you press OK in step 4, the following screen appears.

MOVIE ADVANCE

MOVIE ADVANCE CAN NOT

BE SELECTED FOR EP

RECORDINGS.

PRESS (SKIP) TO CANCEL

NOTES:

Normally there is a period of black and no audio at the beginning and end of previews. The Movie Advance feature detects those parts where the picture fades to black and the audio fades to silence, and initiates fast-motion to skip over the detected previews.

Some previews may not be detected and Movie Advance may not work properly.

The setting you selected in step 3 remains in effect until the cassette is ejected.

	highlight bar (arrow) to		=MOVIE ADVANCE
	your choice.		MOVIE ADVANCE (PREVIEW)
			SKIP SEARCH
	a– Select "MOVIE
		ADVANCE" if you want
		to advance directly to
			PRESS (5,°), THEN (OK)
		the beginning of the
			PRESS (SKIP) TO CANCEL
		movie.
	b– Select "MOVIE ADVANCE (PREVIEW)" if you want
		to advance to the next preview.
	c– Select "SKIP SEARCH" if you do not want to perform
		Movie Advance, then press OK and the VCR enters
		stop mode. To activate the Skip Search function, see
		page 19.
	PERFORM MOVIE
4	ADVANCE
	a– If you selected "MOVIE ADVANCE" in step 3 and
		press OK, the following screen will appear with a
		blue background. The VCR will rewind the
		beginning of the tape, then will fast-motion to the
		beginning of the movie. "READY" will appear and
		blink when the beginning of the movie is detected
		and the Stop mode will be engaged. Press PLAY to
		view the movie.
		MOVIE ADVANCE	MOVIE ADVANCE
		SEARCHING FOR BEGINNING	READY
		OF MOVIE.
			PRESS (PLAY) TO START
		PRESS (STOP) TO CANCEL	PRESS (STOP) TO CANCEL
	b– If you selected "MOVIE ADVANCE (PREVIEW)" in
		step 3 and press OK, the VCR will fast-motion to the
		beginning of the next preview and normal playback
		will resume when it is detected.
		Each press of SKIP SEARCH fast-motions to the
		beginning of the next preview, thereby skipping over
		one preview each time.