JVC HR-VP470U manual SET Auto Clock to on, Select Host Channel, Select D.S.T. Mode, Semi-Auto

12ENINITIALSETTINGS(cont.)

[VP670U]

MENU

CH

OK

[VP470U]

MENU

CH OK

1 2 3

2

4 5 6

7 8 9

0 4

Semi-Auto

You can change the Host Channel/D.S.T. /Time Zone setting manually.

5	SET AUTO CLOCK TO ON
	At the Clock Set screen,	CLOCK SET
	press OK or SHUTTLE
	PLUS%to move the	TIME	DATE YEAR
		1:00PM	12/24	99 THU
	highlight bar to "AUTO
		AUTO CLOCK : ON
	CLOCK" and press CH 5°	HOST CH	: AUTO	(CATV)
	or SHUTTLE PLUS %Þ to	D.S.T.	: AUTO
	set to "ON".	TIME ZONE	: AUTO
		PRESS (5,°), THEN (OK)
	a– To select the Host
		PRESS (MENU) TO END
	Channel — go to step 6
	b– To select the D.S.T. mode — go to step 7
	c– To select the Time Zone — go to step 8
	NOTE:
	The time that has been set previously will be erased
	when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME
	ZONE" setting is changed.
6	SELECT HOST CHANNEL
	You can either select "AUTO" or enter a PBS channel
	number. Move the highlight bar to "HOST CH" by
	pressing OK or SHUTTLE PLUS%, then press CH 5°
	or SHUTTLE PLUS %Þ to set to "AUTO" or the desired
	PBS channel number.
	NOTE:
	There are some PBS channels that do not transmit clock
	setting data.
7	SELECT D.S.T. MODE
	You have three choices:
	a– Select "AUTO" and the adjustment to your VCR's
	clock will be made according to the incoming signal
	from the host channel.
	b– Select "ON" and the adjustment will be made based
	on the clock itself.
	c– Select "OFF" if Daylight Saving Time does not apply
	to you.
	Move the highlight bar to "D.S.T." by pressing OK or
	SHUTTLE PLUS%, then press CH 5° or SHUTTLE
	PLUS %Þ to select the desired mode.

1

3

MENU

OK

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.

SHUTTLE PLUS