JVC HR-VP634U manual If you perform the Dual Quick Set procedure, During Auto Clock Set, With

INITIALSETTINGS

7

Dual Quick Set

2 2

q 5/8 6

IMPORTANT

●Don’t press any buttons on the VCR or remote during Dual Quick Set.

●If you perform Dual Quick Set successfully, there’s no need to perform the Clock (☞ pg. 8) and Tuner (☞ pg. 12) procedures. If, however, you want to add or delete channels, refer to “Add Or Delete A Channel” on page 14.

ATTENTION CABLE BOX SUBSCRIBERS

If you perform the Dual Quick Set procedure . . .

●Select the PBS channel on your cable box before plugging your VCR’s power plug into the AC outlet. (If you have more than one PBS channel, you may have to select an alternative PBS channel if Dual Quick Set is not successful.)

●If there is no PBS channel in your area, perform the Manual Clock Set procedure (☞ pg. 11).

●For automatic clock adjustment to take place the VCR's power must be off and the cable box must be set to the PBS channel at clock adjustment times.

●If you perform Dual Quick Set successfully, D.S.T. will be set to “AUTO”. At the D.S.T. adjustment time (☞ pg. 10), your VCR's power must be off and your cable box must be set to the host PBS channel in your area for the D.S.T. adjustment to take place. If the clock is not set correctly, change the D.S.T. setting to “ON” or “OFF. See step 6 of Semi-Auto procedure (☞ pg. 9) or step 3 of Manual procedure (☞ pg. 11).

With the antenna cable connected the Dual Quick Set function allows the clock and tuner to be set automatically when the power plug is first connected to an AC outlet.

The time and date can be set automatically from clock setting data that is transmitted by one of the regular TV broadcast channels. We call this TV channel the “Host Channel” and it is a PBS channel in your area.

The auto clock set function scans all the channels received by your VCR to find the clock setting data of the Host Channel.

The auto channel set function scans all the channels received by your VCR, then automatically assigns receivable channels to the CH5° buttons, and skips non-receivable channels.

EFFECTUER LE RÉGLAGE RAPIDE DOUBLE

1 Make sure that the antenna cable is connected to the VCR. Then connect the VCR’s power plug to an AC outlet. For connection configuration, refer to “Basic Connections” (☞ pg. 6). The clock and tuner channels will automatically be set.

●Auto clock set is performed first. AUTO is displayed on the Front Display Panel during Auto clock set. Auto Channel set is performed next. The channel numbers are displayed in ascending order during auto channel set. When Dual Quick Set has been completed successfully the correct time is displayed.

●The clock can be adjusted automatically by the Host PBS every hour on the hour (except for 11:00 PM, midnight, 1:00 AM and 2:00 AM) by the incoming PBS channel clock setting data. (This automatic clock adjustment can only be performed when the VCR’s power is turned off.)

●If an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBS channel from an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform the Semi-Auto procedure (☞ pg. 9). Auto channel set (☞ pg. 12) has already taken place and it need not be set again.

●If “- -:- -” appears on the display, your antenna cable may not be connected to the VCR, there may not be a Host PBS signal available in your area, or your cable box may not be set to the PBS channel. If everything is connected and set correctly, perform the Manual Clock Set procedure (☞ pg. 11). Auto channel set has not yet taken place, so please also perform the “Set Receivable Channels” procedure (☞ pg. 12).

During Auto Clock Set	During Auto Channel Set
	The channels appear in
	ascending order, beginning
	with 1.

PM

Dual Quick Set Completed The current time (including AM/PM) is displayed.