Tuner And
Cable Box
Controller
Suggested Location
Place the cable box on top of the VCR. Attach the VCR's Cable Box Controller to the top of the VCR with the Controller’s transmitter pointed towards the cable box’s remote sensor.
Cable box
Your VCR
Controller (suggested locations)
Cable box
Controller
|
| Transmitter |
|
|
|
| Connected to | Connected | |
|
| |||
|
| |||
|
| ANT. IN | to VIDEO/ | |
|
|
| AUDIO IN | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Your VCR
CABLE
BOX
15
This procedure is required if you receive your TV channels through a cable box (descrambler). The Cable Box Controller allows the VCR to automatically switch cable box channels, allowing you to
Situate And Connect
Controller
SITUATE CONTROLLER
1 Place the Cable Box Controller so that the path between its transmitter and the cable box’s remote sensor is unobstructed.
ATTACH CONTROLLER
2 Fasten securely using the supplied adhesive strips.
CONNECT CABLE BOX TO
VCR
3 The connection method depends on the type of cable box you have.
If your cable box has AUDIO and VIDEO OUT connectors . . .
. . . connect them to the AUDIO and VIDEO IN connectors on your VCR.
If your cable box doesn’t have AUDIO and VIDEO
OUT connectors . . .
. . . connect the antenna output connector on the cable box to the ANT.IN connector on the rear of your VCR.
NOTE:
Refer to your cable box’s instruction manual during connection.
CONNECT CONTROLLER
TO VCR
4 Connect to the CABLE BOX connector on your VCR.
About Your Cable Box
This VCR has two separate methods to control your Cable Box.
●The VCR's Wireless Remote Control Unit can control your Cable Box.
This eliminates the need for a separate Cable Box Remote Control Unit.
●The VCR's Cable Box Controller can also control your Cable Box. This allows the VCR to change your Cable Box's channel number during timer recording.
Each method must be set up separately. To set up the VCR's Remote Control unit, refer to page 50. To set up the Cable Box Controller go to page 16.
