JVC HR-VP638U manual Make Connection, Tape Position Indicator, Next-Function Memory

POWER	MENU	SHUTTLE
		6
		q

PLAY

POWER

1	2	3
4	5	6
7	8	9
	0	TIMER

LAY

FF

REW

C.MEMORY

MENU

31

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW, or
use the SHUTTLE ring, or perform			+	+	+
an Index Search or Instant ReView.		B					E
The position of "	" in relation to
"B" (Beginning) or "E" (End) shows			COUNT			0:33:27
you where you are on the tape.

NOTE:

"SUPERIMPOSE" must be set to "ON", or the indicator will not appear (☞ pg. 28).

Next-Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding. * Before continuing, ensure that the VCR is in stop mode.

a– For Automatic Start Of Playback After Tape Rewind . . .

. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press POWER within 2 seconds. c– For Automatic Timer Standby After Tape Rewind . . .

. . . press REW, then press TIMER within 2 seconds.

NOTES:

●To do the above using the VCR's controls:

During Stop, turn the SHUTTLE all the way to the left and release it instead of pressing REW, and then press PLAY or POWER within 2 seconds.

●If you want the "next function" to automatically start when the counter reads "0H 00M 00S" (instead of at the beginning of the tape), press C. MEMORY so that the counter memory indicator appears on the front display panel before pressing REW.

AV COMPU LINK Playback

Your VCR is compatible with JVC’s AV COMPU LINK components, including amplifiers (or receivers) and televisions. AV COMPU LINK provides one touch control of the audio and video compo- nents that are linked via their AV COMPU LINK connectors.

For example: simply load a cassette in the VCR and press PLAY and the AV COMPU LINK components automatically power on, the TV's VIDEO mode is selected and the VCR goes into play mode. (PLAY need not be pressed if the cassette's record safety tab is removed.)

1	MAKE CONNECTION
	Connect your VCR to an AV COMPU LINK component
	as shown in the illustration on page 32.
	● The mini-plug cable is a mono 3.5 mm mini-plug to
	mono 3.5 mm mini-plug connector.

2	TURN ON THE VCR
	Press POWER.
	ACCESS MAIN MENU
3	SCREEN
	Press MENU as many times as necessary.

CONTINUED ON NEXT PAGE.