JVC HR-VP82U manual SET Program Information, Shuttle Plus 5 button

MENU OK

6

q

CH

	1		2	3
NUMBER	4		5	6
				NUMBER "9"
	7		8
				9
			0	TIMER
	NUMBER	"8"		CH

OK

MENU

SHUTTLE PLUS

			39
		SET PROGRAM
5		INFORMATION
		Press the appropriate NUMBER keys to set the date,
		start/stop time and channel number. Press CH5° or
		SHUTTLE PLUS 5° to set AM/PM and tape speed.
		Press OK after AM/PM, channel number and tape speed
		settings. The next setting that can be set begins flashing.
		● Any information comprised of 1 digit (except the
		channel number) should have a "0" entered before it.
		● It is possible to set all information using the CH5° or
		SHUTTLE PLUS 5° button.
		(In this case, press OK after each setting.) Do not use
		the CH ° or SHUTTLE PLUS ° button to set the date.
		NOTE:
		If you are using a cable box, enter the cable box
		channel, not the channel to be recorded. The channel
		to be recorded must be selected on the cable box. (The
		cable box channel is the VCR's channel that displays
		the chennels received by the cable box.)
		** You can record selected programs at the same time
		every weekday, or once a week. Before entering the
		month, press NUMBER key “8” (DAILY) or “9”
		(WEEKLY). Either "DAILY" or "WEEKLY" appears.
		Press again and "DAILY" or "WEEKLY" disappears.
6		MAKE CORRECTIONS
		To change any of the settings, press OK or SHUTTLE
		PLUS ª £until the item you want to change
	begins blinking. Then set as in step 5.
		RETURN TO NORMAL
7		SCREEN
		Press MENU as many times as necessary.
		● Press just once to access the Auto Timer screen
		(☞ pg. 41).
8		ENGAGE TIMER MODE
		Press TIMER. The VCR turns off automatically.

NOTES:

EXAMPLE

If you program the VCR to timer record a show on September 6 on channel 40 from 12:00 noon to 1:00 PM in SP mode, the screen will look like this:

PROGRAM 1

DATE	9/ 6 SUN
START	12:00 PM
STOP	1:00 PM
CHANNEL	40 SP

PRESS NUMBER KEY(0-9) OR (5,°), THEN (OK)

PRESS (MENU) TO END

●To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

●In case of a power failure after programming, the VCR’s memory backup keeps your selections for 10 minutes.

●If you select "PROGRAM SET" without having set the date and time, an error message appears. Follow its instructions.

●If you enter a start time that has already passed, "ERROR" appears on the screen and flashes.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the VCR’s power goes off automatically.

●You can program the timer while a regular recording is in progress; the on-screen menu will not be recorded.

●If the end of tape is reached during timer recording, the cassette is automatically ejected.

●When timer-recording cable channels received through a Cable Box, be sure to keep the Cable Box set to ON.