Before Operation - VCP part
PREPARATION
13
How to using the main menu

This VCP can easily be programmed by using the

menus displayed on screen.

The menus are controlled from the Remote

Control Handset.

11
Switch on your TV set and video player by pressing
11.
22
Press VCP.
33
Press MENU.
The main menu will appear on the TV screen.
OF.OSD ON/OFF - To switch the display of opera-
tional mode of your VCP ON or
OFF (see p 24).
OOPR - To improve the playback picture
(see p 18).
ODR - To check a problem with your VCP
(see p 24).
OABC OSD - To change the language setting for
OSD.
You can select the language
between English and Russian.
OKARAOKE - To switch on or off Karaoke &
Karaoke Search (see p 26).
OSCORE - To display the score your song when
you Karaoke (see p 26).
OSYSTEM - Select the colour system used for
playback and recording.
The system is changed as shown
below.(Refer to the right for more
information.)
*If you want to record NTSC signals,
press OK and select between
NTSC 3.58 and NTSC 4.43.
44
Press 1and 2to select the option to change,
then Press OK to change the setting and
press 1and 2to select the sub menu.
55
Press MENU to remove the menu screen.
To set the colour system
If streaks appear during playback, set colour system
manually to conform to the system that the tape was
recorded in. (Normally set the switch to AUTO.)
If your tape was Set colour If your TV is
recorded in system to
PAL PAL
NTSC3.58 MULTI-SYSTEM TV
NTSC-PB PALTV
NTSC4.43 MULTI-SYSTEM TV
NTSC-PB PALTV
MESECAM MESECAM MULTI-SYSTEM TV
OPR
DR
VCR
AB
C
OSD

Source Mode System Change

Recording AUTO →PAL→ MESECAM
Playback AUTO →PAL→ MESECAM
Recording NTSC3.58 →NTSC4.43*
Playback NTSC-PB →NTSC3.58 →NTSC4.43
PAL/
MESECAM
NTSC
NTSC4.43
NTSC3.58