Pioneer PD-F907 To program tracks/discs in a desired order Program play, Ing stop mode

VARIOUS OPERATIONS

To program tracks/discs in a desired order (PROGRAM play)

ÖThe remote control is the most convenient way to perform these operations.

ÖYou can program up to 36 steps.

Ö The parenthesis ( ) show operations for the main unit.

D

POWER HI-LITE PREVIOUS BEST

		REPEAT MODE		PGM	CLEAR	1
2	3	1	2	3	TIME
		4	5	6
		7	8	9
	2	DISC	0	TRACK		3
		SET		SET
				– DISC +
		1	Á	4	¢
		7	8	3	RANDOM	5

FILE-TYPE CD PLAYER

REMOTE CONTROL UNIT

CU-P0090ë

5	3		Press 3.
			The program play starts from the
			track that was programmed first.
			DISC TRACK MIN SEC
(	6	)
			PGM

ÖItems stored in memory are saved for approximately 2 days, even if the power cord is unplugged. However, this period may be shortened somewhat, depending on the amount of memory used.

(Memory Back-Up Function).

The following operations can only be performed during normal play, HI-LITE scan or PREVIOUS scan

<Programming tracks during normal play>

(Direct program)

1.Press PGM (PROGRAM).

•Program mode is activated.

2.Press PGM (PROGRAM) during playback.

•The current track is programmed.

Operation example:		Programming disc 2, track 7 as step 1,	<Programming during normal playback(remotecontrolonly)>
		and disc 5, track 3 as step 2.	(Preprogramming)
			You can program during normal playback.
1	PGM
		Press PGM (PROGRAM) dur-	(\Operation example 1	2	3	4 )
		ing stop mode.	• The player changes to program play when the current track
			finishes playing back.
	PROGRAM		• To change to program mode directly, press 3.

(		)
2	2	Use the digit buttons to se-

lect the disc, then press DISC

Ç SET.

(Use DISC (–/+)to select the disc

	DISC	number, then press	PROGRAM.)
	SET
		DISC TRACK	MIN SEC
DISC		PROGRAM	PGM
	=
(		) The PGM indicator starts to blink.
3	7	Use the digit buttons to se-

lect the track, and press

TRACK SET.

Ç(Use 41/Á¢ to select the

TRACK	track number, then press PROGRAM.)
SET	DISC TRACK MIN SEC

The following operations can only be performed during stop mode

<Programming an entire disc as one step>

(Disc all program)

If you skip step 3 of the operation example, disc 2 is programmed as step 1.

<Programming a pause (remote control only)>

(Pause program)

If you press 8at step 4 , you can program a pause. When you press 8, “PA” appears in the display instead of the disc number.

ÖFor example, when making a program for recording both sides of a cassette tape, press 8 to insert a pause after programming the tracks for one side. After turning the tape over, press 8to resume recording.

Notes!!

ÖYou cannot program a pause as the first step, or program two pauses in a row.

ÖWhen you program a pause, it counts as 1 step and reduces the total number of tracks you can program.

OPERATING	BEFORE
OPERATIONS	BASIC

PGM

DISC TRACK MIN SEC

PROGRAM
( 41 Á¢ =	)

PGM

Ö To erase a program...

Press 7twice during playback (or once in stop mode). You can also

erase the program by pressing MODE, RANDOM, PREVIOUS, or

SINGLE LOADER PLAY in either play or stop mode (or by

pressing BEST in stop mode).

Ö To cancel a program step

4 5	DISC
	SET

\

TRACK

3SET

\

Repeat steps 2 and 3 to pro- gram additional discs and tracks.

Once the track times have been added, the PGM indicator stops blink- ing and the following display appears (Total Time).

DISC TRACK MIN SEC

PGM

In stop mode, each time you press CLEAR, the last step in the
program is erased.
Ö If a programmed disc is missing or inserted backwards
during program play, “	no dISC” appears in the display,
the step is automatically erased, and playback proceeds to the
next step.
Ö Program contents are stored in memory even when the power
is turned off (STANDBY).

Notes!!

Ö If step 5 is carried out before the accumulated time is displayed, the program play starts and the time is not displayed.

Ö When UNLOAD is pressed while a program has been entered, the disc for the 1st program step comes on the center position and the hood opens.

DISC	=PROGRAM	PROGRAM	)
(		= 41 Á¢ =

Ö The display is not shown if the total time of the program is 100 minutes or more.

15

<PRB1268> En