JVC HR-XV2E Connections Cont’d Connecting to Optional Equipment, Digital Multi-channel sound

Connections (Cont’d)

Connecting to Optional Equipment

Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround

Connect the Left and Right Audio out jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2 or DTS)

1(COAXIAL or OPTICAL) to the corresponding in

jack on your amplifier. Use an optional digital (COAXIAL or OPTICAL) audio cable.Connect this unit’s DIGITAL AUDIO OUT jack

2 You will need to activate this unit’s digital output. (See “Digital Audio Output” on page 20).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your unit (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

Warning:

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

Rear of this unit

VHS IN+OUT/DVD OUT

EURO AV2 DECODER	DVD EXCLUSIVE OUT
DVD/VCR
	COMPONENT	AUDIO
AUDIO OUT
	VIDEO OUT	OUT

DIGITAL
AUDIO OUT
R	Pr	R
L	Pb	L
EURO AV1 AUDIO/VIDEO
OPTICAL
S-VIDEO OUT	Y	COAXIAL

2 channel analog stereo or Dolby Surround connection.

DVD exclusive out

Notes

–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

–To see the audio format of the current DVD in the On-Screen Display, press AUDIO MONITOR.

Digital multi-channel connection (DVD exclusive out connecttion)

		L	R	COAXIAL
	OPTICAL
DIGITAL INPUT		AUDIO INPUT		DIGITAL INPUT

Amplifier (Receiver)

12