JVC HR-XV2E Timer recording using On Screen Display

OPERATION

Operation with tape

Timer recording using On Screen Display

You may set up to seven timer record events within

one month of the current date.

Note

Before setting the timer make sure that you have set

the VCR clock correctly and you know which stations

you have tuned TV stations on your VCR.

Insert a video cassette with protection tab into your

VCR.

The video cassette should have the window side

facing up and the arrow facing away from you.

Press MENU.

Press 1or 2to select REC.

Press OK.

Press OK to start setting the timer record event.

If all timer record events are full press 33 or 44to

select the event that you wish to remove and

replace.

Press 1to delete the event.

Press the numbered buttons to enter the station

that you wish to record.

When selecting stations 1 - 9, press 0 first, then the

channel number; for example Stations 3 - 03. You

may also select Channels by pressing 33 or 44.

Once selected press 2.

If you wish to record from AUDIO IN (L/R) and

VIDEO IN on the front or from the EURO SCART

sockets on the back of your unit, press AUXto

select for correct display (AV1, AV2 or AV3).

Press the numbered buttons to enter the date of

the programme.

If you press OK before entering the date you may

select one of the following automated recording

features. Press 1or 2to select, then press OK to

confirm.

DLYTo record every day (except Saturday and

Sunday) at the same time.

SU~SA To record at the same time every week.

Press the numbered buttons to enter the recording start

and end times of the programme that you wish to record.

Please note your VCR uses a 24 hour clock. e.g.

1pm will be displayed as 13:00.

You may also select the the start and end times by

pressing 33 or 44.

Press 2and press 33 or 44to switch VPS/PDC on

or off. Press 2to select the recording speed.

Press 33 or 44to select the desired tape speed (SP, IP, or LP).

IP mode determines how much tape is left and

switches speed from SP to LP, if necessary, to

complete recording the program. IP mode is not

selected when VPS/PDC is ON.

Check that the timer event details are correct.

Press MENU twice.

If PLEASE CHECK is displayed, you have entered

incorrect and will need to re-enter the data.

Press POWER to switch your VCR Standby.

TIMER will appear in the display window while your

VCR waits to make the recording.

will appear in the display window while your VCR

waits to make the recording.

To watch a DVD during timer recording standby

mode, press POWER and VCR/DVD to switch to

DVD mode.

Notes



If at a later date you wish to delete or change any of the

settings in timer event memory you may do so without

having to enter all the timer event information again.

Simply display the timer event screen. Press 33or 44to

select the event that you wish to delete or change.

Press 1to delete the event...or

Press OK to change; then press 1or 2to select;

Station, Date, Start and End times and Recording

speed. Press 33or 44to enter the correct information.

If Timer record events Overlap...

Make sure that the preset times of the timer recording

events do not overlap. If they do, the earlier programme

will always be given priority.

Example:

Programme 1 is programmed to start at 16:00 and end at 17:00.

Programme 2 is programmed to start at 16:30 and end at 17:30.

(In this case, Programme 1 will be recorded in its entirety,but

only the last 30 minutes of Programme 2 will be recorded.)

PR DATE T I M E

- - - - SP

PR-01 16

- - - - - -- -~::

- - - - - - - -~::

DLY SU MO TU WE TH FR SA

PR DATE T I M E

- - - -

- - - - SP

PR-01

- - - - - -- -~::

1900 2000~::

- - - - - - - -~::

PR DATE T I M E

- - - -

- - - - SP

PR-01

- - - - - -- -~::

1900 2000~::

- - - - - - - -~::

PR DATE T I M E

- - - -

- -

- - - - SP

- -

- - - - - -- -~::

- - - - - - - -~::

PR DATE T I M E

- - - -

- -

- - - - SP

PR-01

- - - - - -- -~::

- - - - - - - -~::