JVC HR-XV2E Additional Operation VCR part Hi-Fi Stereo Sound System, Wide Screen Compatibility

Additional Operation - VCR part

Hi-Fi Stereo Sound System

Your VCR will record and playback Hi-Fi stereo sound. In addition it has a stereo NICAM digital stereo sound decoder. This allows you to record and playback the sound in several different ways. Video cassettes record- ed on your VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, stereo audio system, video disc or another Hi-Fi VCR.

1you to enjoy broadcasts with NICAM sound, as well as standard stereo, bilingual and mono sound. The particular type of sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds:

STEREO NICAM

Sound is automatically recorded on the Hi-Fi stereo and mono tracks of the video tape.

BIL NICAM

Both audio channels will be recorded on the Hi-Fi stereo tracks. The primary language channel (left) will be recorded on the mono track of the video tape.

MONO

The sound is recorded on the Hi-Fi tracks and the mono track of the video tape without any separation.Your VCR’s NICAM digital sound decoder allows

2 Press AUDIO MONITOR repeatedly until the desired audio mode appears.

The choice is STEREO, LEFT, RIGHT and MONO.

3 In BIL NICAM playback the primary language is output onthe left channel and the secondary chan- nel is output simultaneously from the right channel when audio output is set to STEREO. The primary language willbe output from both channels when the audio setting is MONO.

Please note that when adjusting the tracking control Hi-Fi stereo sound may revert to MONO.

Wide Screen Compatibility 16:9

Your VCR can record and play back wide screen aspect ratio programmes (16:9). To record a wide screen for- mat programme successfully the correct type of wide screen signal must be broadcast by the TV station.

1Press MENU.

Press F or G to select 16:9/4:3. Press OK.Switch on your VCR.

216:9. AUTO:

Automatically plays back Wide-Screen programmes as Wide-Screen and Normal programmes as normal.

4:3

Only for playing back and recording Normal format recordings (4:3).

16:9:

Only for playing back and recording Wide-Screen format recordings (16:9).Press D or E repeatedly to select: AUTO, 4:3 or

	P	1	2	A B
		Pr-12		C
REC	RSET	ACMS	AUTO OSD		16:9
fOSD		STB	4:3	NIC
					4:3
ON	16:9	THR-	16:9		i
OFF	4:3	OUGH

3screen.

To enjoy Wide-Screen playback you must connect your VCR to the TV using a SCART cable.Press MENU to remove the menus from the TV

To set the decoder

We have already described, how to connect a decoder for pay-TV station as CANAL+ or PREMIERE on page

11.For the recording of an encoded station you do not have to control anything. You just select the station and wait shortly until the decoding will start.

1The main menu will appear on the TV screen.

Press F or G to select the DECODER. Press OK.Press MENU.

2ON: When the decoder is connected to the AV2 socket.

OFF: When another VCR is connected to the AV2

socket.

Press MENU to return to a TV picture.Press D or E to select.

			1 2		A B
REC	PSET	Pr-12	TIME	SYS-	C
		ACMS
	R		DATE	TEM	OSD	16:9
fOSD	16:9	STB	+ -		NIC	4:3
ON		THR-	DECO-	EPC		OK i
OFF	4:3	OUGH	DER

REC PRSET

fOSD

ON 16:9 OFF 4:3

	1 2		A B
Pr-12	TIME	SYS-	C
ACMS	DATEAUTOEM		OSD	16:9
STB	+ - 4:3		NIC
				4:3

THR-	DECO-	i
OUGH	DER16:9EPC

34