JVC HR-XV45SEK, 3834RV0038A manual How to using the main menu, Tuning in TV Stations Automatically

How to using the main menu

This DVD+VCR can easily be programmed by using the menus displayed on screen.

The menus are controlled from the Remote Control Handset.

1.Switch on your TV set and video recorder by pressing the 1/+ button.

2.Press i button.

The main menu will appear on the TV screen.

1 2

SET SYS

fOSD

ON

OFF

REC - Timer recording setting (see p. 25). PR SET - Manual tuning setting (see p. 15). ACMS - ACMS (Automatic Channel Memory

System) (see p. 14).

SET - Date & clock setting (see p. 13).

SYS - To set the Colour TV System (see p. 13).

(Dr.) - To check a problem with your VCR (see p. 36).

F.OSD ON/OFF - To display the operational mode of your VCR

(see p. 36).

(16:9/4:3) - To select the aspect ratio of your TV (see p. 37).

DECODER - To use a pay-TV decoder (or Satellite) with your VCR (see p. 37).

(OPR) - To improve the playback picture (see p. 22).

ONIC - To activate or deactivate the NICAM digital sound (see p. 37).

Tip:

You can change the menu language on the DVD setup menu. (See the Menu Language on page 18.)

3.Press 1 and 2 to select the desired menu. Press OK and press 3 or 4 to select.

4.Press i to remove the menus from the TV screen.

Tuning in TV Stations

Automatically

If the TV broadcast signal is weak your VCR may not detect the necessary information and will not be able to store them correctly. To overcome this problem please turn to the MANUAL TUNING section on page 15.

1.Press 1/+ to turn on your DVD+VCR.

2.Press i button.

The main menu will appear on the TV screen. Press 1 or 2 to select the ACMS.

Press OK.

Pr-12	1	2				ACMS
	SET		SYS
ACMS				Pr-12
fOSD				ACMS
ON				OK i	Pr-12	OK i
OFF					ACMS

4.Press OK to again to start the automatic tuning process.

01	C02	00	BBC1
02	C03	00	BBC2
03	C04	00	ITV

S	E
Pr-12	i
ACMS

5.The TV STATION TABLE will appear when tuning is completed.

Press i to save your settings.

01 C02 00 BBC1

02	C03	00	BBC2
03	C04	00	ITV
04	C05	00	CH4
05	C06	00	CH5
06	- -	- -	- - - - -
07	- -	- -	- - - - -
08	- -	- -	- - - - -
		MOVE :
		DELETE :		,
PSET					OK i
R

Notes:

Please note currently only a limited number of TV companies transmit the Programme Delivery Control (PDC) signal which enables your DVD+VCR to suc- cessfully identify and store them. If your DVD+VCR has difficulty in identifying a TV station please turn the page to find out how to manually tune in and name a TV station. While automatic tuning is taking place the time and date will set automatically.

If - - :- - appears in the DVD+VCR display it means that the broadcast signal is weak and the clock was not set. Please turn to CLOCK SET section of this book on page 13.

14