Satellite Auto Recording

This function allows you to automatically record a satellite program which is timer-programed on your external DBS receiver or the cable box if it has a timer.

ATTENTION

Be sure not to turn on the DBS receiver before the program is executed; otherwise, the unit will start recording when the DBS receiver’s power is turned on.

Before performing the following steps:

•Make sure the DBS receiver is connected to the unit’s VIDEO/AUDIO input (F-1) connector.

•Program the timer on the DBS receiver.

•Insert a cassette with the safety tab in place.

•Turn on the TV and select the VCR channel (or AV mode).

•Slide the TV/VCR/DVD switch on the Remote to the right.

~Select the VCR deck.

Press VCR on the Remote so that the VHS indicator lights up on the front display panel.

ŸSet the tape speed.

Press SP/EP.

!Engage the Satellite Auto Recording mode.

Press and hold REC LINK for about 2 seconds. The “” and “ ” indicators light up and the unit turns off automatically.

NOTES:

•Operation on the DVD deck are not possible when the Automatic Satellite Program Recording mode is engaged, or timer recording is in progress.

•To disengage the Satellite Auto Recording mode, press REC LINK. The “” indicator goes off.

•Depending on the type of DBS receiver, the unit may not record a slight portion of the beginning of the program or may record slightly longer than the actual length of the program.

Introduction

Preparation

Operations on VCR Deck

Operations on DVD Deck

Advanced Operations

Additional Information

23