Other Functions
Slide the TV/VCR/DVD switch on the Remote to the right.
Remote A/B/C/D Code Switching
The Remote is capable of controlling four JVC video units independently. Each of units can respond to one of four codes (A, B, C or D). The preset code is A.
On the Remote
Keep pressing VCR down during steps ~ - Ÿ.
~Change the Remote code.Press the number button “1” for A, “2” for B, “3” for C or “4” for D.
ŸSet the Remote code.Press ENTER to set the code.
NOTE:
Once the batteries are removed, the Remote code is back to A.
On the unit~Turn off the unit.Press POWER on the unit.
ŸDisplay the code.Press 3 PLAY on the unit for over 5 seconds while the unit is turned off. The code currently set appears on the front display panel.
!Change the unit’s code.Press 7 STOP on the unit. The code currently set on the Remote will be applied to the unit.
NOTE:
Even if you unplug the end of the mains power cord from the mains, the code currently set remains.
Child Lock
You can disable the unit’s operation.
~Set the Child Lock.Press and hold POWER on the Remote for more than 10 seconds while the unit is turned on. The unit turns off, and “
(CL)” appears on the front display panel.
•To release the child lock, press and hold POWER on the Remote until the unit turns on.
NOTE:
Timer recording programs will be performed even if the child lock function is activated.
Tray Lock
You can lock the disc tray to prohibit the unwanted disc ejection by children.
To lock the disc tray
While the unit is turned off, press and hold 7 STOP, then press 0 OPEN/CLOSE on the unit.
“
(Lock)” appears on the front display panel and the disc tray is locked.
To unlock tray
While the unit is turned off, press and hold 7 STOP, then press 0 OPEN/CLOSE on the unit.
“
(Unlock)” appears on the front display panel.
Introduction
Preparation
Operations on VCR Deck
Operations on DVD Deck
Advanced Operations
Additional Information
31