(For
Antenna or Cable
Coaxial cable
Flat feeder Matching transformer
(not supplied)
Be sure to connect the unit’s VIDEO OUTPUT (DVD/ VCR) connector to the TV’s VIDEO input connector.
~Place the unit on a stable, horizontal surface.ŸConnect the unit to TV.
1Connect the antenna, unit and TV as per “Basic Connections.” (☞ pg. 9)
2Connect the unit’s COMPONENT VIDEO OUTPUT connector to the TV’s component video input connector.
AC Outlet
AC Power Cord
AUDIO OUTPUT
VIDEO OUTPUT
!Plug the end of the AC power cord into an AC outlet.
⁄Set the VCR channel to off.Before performing the following steps:
AUDIO OUTPUT
COMPONENT VIDEO OUT
VHF/UHF
IN
Back of unit | VHF/UHF |
| OUT |
•Make sure there is no cassette inserted in the unit.
•Make sure the unit is turned on, then press VCR/DVD on the unit so that the VHS indicator lights up on the front display panel.
1Press POWER on the unit to turn off the unit, then
press 7 STOP on the unit for more than 5 seconds. “3 CH” appears on the front display panel.
2Press CH +/– on the unit to select “3 CH,” “4 CH,” or “– CH” (off), then press POWER on the unit.
NOTES:
Component
Audio/video cable (not supplied)
• If Plug&Play or Tuner setting has not previously been |
performed, the Language Select screen appears and |
Plug&Play takes place automatically. |
• By using the component video connection, you can view |
the images in the progressive mode. For switching to the |
Video cable
Audio cable (not supplied)
progressive mode, refer to “Scan Mode Set (DVD deck |
(not supplied)
To Component |
|
Video/audio Input | To Audio/video |
connector | input connectors |
only).” (☞ pg. 11) |
• To enjoy playback of DVD with the component video |
connection, set the TV’s input to the component video input. |
TV
RF cable (supplied)
To 75 ohm Terminal
10