EN 77

 

 

* The default setting is bold in the table below.

 

 

8 S-VHS MODE

Your unit can record in S-VHS (Super VHS), S-VHS ET or VHS.

ON

●To record in S-VHS:

OFF

Set “S-VHS MODE” to “ON”. Then, insert a cassette marked “S-VHS”. The

 

 

S-VHS indicator lights up on the front display panel.

 

The S-VHS recording mode is selected.

 

●To record in S-VHS ET on a VHS cassette:

 

Set “S-VHS ET” to “ON”. ( pg. 74) Then, insert a cassette marked “VHS”. The

 

S-VHS indicator lights up on the front display panel.

 

●To record in VHS:

 

Insert a cassette marked “VHS”.

 

Set “S-VHS ET” to “OFF”. ( pg. 74)

 

The VHS recording mode is automatically selected regardless of the “S-VHS

 

MODE” setting.

 

 

●To record in VHS on an S-VHS cassette:

 

Insert a cassette marked “S-VHS”. The S-VHS indicator lights up on the front

 

display panel. Then, set “S-VHS MODE” to “OFF”. The S-VHS indicator goes

 

off.

 

 

The VHS recording mode is selected.

 

NOTE:

 

 

When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS

 

indicator lights up on the front display panel regardless of the “S-VHS MODE” setting.

 

 

8 FRONT AUX INPUT

Select the appropriate mode depending on the connector being used on the

VIDEO

front panel.

 

S-VIDEO

VIDEO:

To use the VIDEO input connector on the front panel.

 

S-VIDEO:

To use the S-VIDEO input connector on the front panel.

 

 

8 REAR AUX INPUT

Select the appropriate mode depending on the connector being used on the

VIDEO

rear panel.

 

S-VIDEO

VIDEO:

To use the VIDEO input connector on the rear panel.

 

S-VIDEO:

To use the S-VIDEO input connector on the rear panel.

 

 

8 AUTO POWER OFF

When this function is set to “3H”, the unit is turned off automatically if no

3H

operation is done within 3 hours. “AUTO POWER OFF IN 3 MIN” appears on

OFF

the screen 3 minutes before the unit is turned off.