EN 85

 

 

 

 

2.

Not MP3/WMA files but JPEG files are

● The MP3&WMA/JPEG setting is set to

When both MP3/WMA files and JPEG files

 

played.

“JPEG”.

are recorded to a disc, set “MP3&WMA/

 

 

 

JPEG” to “MP3&WMA” to play MP3/WMA

 

 

 

files. ( pg. 79)

 

 

 

 

3.

The MP3/WMA control display

● No MP3/WMA files or JPEG files are

Replace the disc. ( pg. 7)

 

appears on the TV screen, but no

recorded to the disc, or the disc is an

 

 

operation can be performed.

unplayable disc (such as CD-ROM).

 

 

 

 

JPEG Playback (DVD deck)

 

 

 

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

A disc cannot be played.

● No JPEG files are recorded to the disc.

Replace the disc.

 

 

● JPEG files do not have the correct file

Add correct file extension (.jpg, .jpeg,

 

 

extension in their file names.

.JPG, .JPEG or any uppercase and

 

 

 

lowercase combination such as “.Jpg”) to

 

 

 

their file names.

 

 

● JPEG files are not recorded in a format

Replace the disc. (Record JPEG files using

 

 

compliant with ISO 9660 Level 1 or 2.

a compliant application.)

 

 

 

 

2.

Not JPEG files but MP3/WMA files are

● The MP3&WMA/JPEG setting is set to

When both MP3/WMA files and JPEG files

 

played back.

“MP3&WMA”.

are recorded to a disc, set “MP3&WMA/

 

 

 

JPEG” to “JPEG” to play JPEG files.

 

 

 

( pg. 79)

 

 

 

RECORDING (VCR deck)

 

 

 

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Recording cannot be started.

● There is no cassette loaded, or the

Insert a cassette, or using adhesive tape,

 

 

cassette loaded has had its record safety

cover the hole where the tab was

 

 

tab removed.

removed.

 

 

 

 

2.

TV broadcasts cannot be recorded.

● “F-1” or “L-1” has been selected as the

Set to the desired channel.

 

 

input mode.

 

 

 

 

 

3.

Tape-to-tape editing is not possible.

● The source (another video recorder,

Confirm that the source is properly

 

 

camcorder) has not been properly

connected.

 

 

connected.

 

 

 

● All necessary power switches have not

Confirm that all units’ power switches are

 

 

been turned on.

turned on.

 

 

● The input mode is not correct.

Set the input mode to “F-1” or “L-1”.

 

 

 

 

4.

Camcorder recording is not possible.

● The camcorder has not been properly

Confirm that the camcorder is properly

 

 

connected.

connected.

 

 

● The input mode is not correct.

Set the input mode to “F-1” or “L-1”.

 

 

 

 

5.

“” and “$” on the front display

● The end of the tape was reached during

The program may not have been recorded

 

panel won’t stop blinking.

recording.

in its entirety. Next time make sure you

 

 

 

have enough time on the tape to record

 

 

 

the entire program.