4

Step

3

: Hook Up

If you need more detailed information, see page 5.
Illustrations of the input/output terminals below are
typical examples.
When you connect other components, refer also to their
manuals since the terminal names actually printed on
the rear vary among the components.
Turn the power off to all components before
connections.
To a wall outlet
Plug the AC power cord only after all
connections are complete.
Demonstration will start automatically. To
cancel it, see page 8.
AM loop antenna (supplied)
Turn it until the best reception
is obtained.
FM antenna (supplied)
Extend it so that you can obtain
the best reception.
To assemble the AM loop antenna

Do not connect the power cord until all other connections have been made.
HX-C6[J]-f.book Page 4 Monday, March 7, 2005 3:28 PM