ENGLISH
Indications | Item | Setting, [reference page] | |||
| ( |
| : Initial) |
|
|
|
|
|
|
|
|
| SCROLL *2 | • | ONCE | : | Scrolls the track information once. | |
Scroll | • | AUTO | : | Repeats scrolling (at | |
| • | OFF | : | Cancels. | |
|
|
|
| • | Pressing D DISP for more than one second can scroll the display |
|
|
|
|
| regardless of the setting. |
|
|
|
|
|
|
| L/O MODE | • | REAR | : | Select if both the LINE OUT terminals are used for connecting the | |
Line output mode |
|
|
|
| speakers (through an external amplifier). |
| • | WOOFER | : | Select if the REAR LINE OUT terminals are used for connecting a | |
|
|
|
|
| subwoofer (through an external amplifier). |
|
|
|
|
|
|
| WOOFER *3 | • | LOW | : | Frequencies lower than 90 Hz are sent to the subwoofer. | |
Subwoofer cutoff | • | MID | : | Frequencies lower than 135 Hz are sent to the subwoofer. | |
frequency | • | HIGH | : | Frequencies lower than 180 Hz are sent to the subwoofer. | |
|
|
|
|
| |
| AUX ADJ | A.ADJ 00 | : | Adjust the auxiliary input level to avoid the sudden increase of the | ||
Auxiliary input level | — A.ADJ 05 |
| output level when changing the source from external component | ||
adjustment |
|
|
|
| connected to the AUX input jack on the control panel. |
|
|
|
|
| |
| TAG DISP | • | TAG ON | : Shows the Tag information while playing MP3/WMA tracks, [9]. | ||
Tag display | • | TAG OFF | : | Cancels. | |
|
|
|
|
| |
| AMP GAIN | • | LOW PWR | : VOL 00 – VOL 30 (Select this if the maximum power of the speaker is | ||
Amplifier gain |
|
|
|
| less than 50 W to prevent damaging the speaker.) |
control | • | HIGH PWR | : VOL 00 – VOL 50 | ||
|
|
|
|
|
|
| AREA | • | AREA US | : | When using in North/Central/South America. AM/FM intervals are set | |
Tuner channel |
|
|
|
| to 10 kHz/200 kHz. |
interval | • | AREA EU | : | When using in any other areas except North/Central/South America. | |
|
|
|
|
| AM/FM intervals are set to 9 kHz/50 kHz (100 kHz during auto search). |
•AREA SA : When using in South American countries. AM/FM intervals are set to 10 kHz/100 kHz.
| IF BAND | • | AUTO | : | Increases the tuner selectivity to reduce interference noises between |
Intermediate |
|
|
| close stations. (Stereo effect may be lost.) |
frequency band | • | WIDE | : | Subject to interference noises from adjacent stations, but sound |
|
|
|
| quality will not be degraded and the stereo effect will remain. |
|
|
|
|
|
*2 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *3 Displayed only when “L/O MODE” is set to “WOOFER.”
14