JVC KD-AR7000, KD-SHX700 1 Select the Tuner, Listening to the radio, 2 Select the band (FM/AM), To stop searching, 3 Start searching for a station, To tune in to a station manually

Radio Operations

Listening to the radio	3 Start searching for a station
1 Select the Tuner

SOURCE

“Auto Search” begins.

When a station is received, searching stops.

To stop searching, press the same button.

ENGLISH

2 Select the band (FM/AM)

OK	FM1 FM2
BAND

AM FM3

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

To tune in to a station manually

In step 3 above...

Hold Hold

then

Activate “Manual	Select station
	frequencies.
Search.”

What information is shown on the display

The following information are shown commonly for tuner operations.

• If you press DISP on the control panel, the display will show the different information or different screens (see page 14).

Preset number if any

Current band

See page 12. Station Frequency (with its icon) Station name assigned* (with its icon)

* To assign names to the stations, see page 35.

11