JVC KD-AR800J Storing your own sound adjustments, LOW, MID, mode, FREQ, LEVEL, WIDTH, HI LEVEL, Indication, Preset values, FREQ (LOW, HI):, WIDTH (LOW, MID):

Storing your own sound adjustments

You can adjust the sound modes to your preference and store your own adjustments in memory (USER 1, USER 2 and USER 3).

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

FREQ (LOW, HI):

Select the center frequency to adjust.

WIDTH (LOW, MID):

Select the band width level.

LEVEL (LOW, MID, HI):

Adjust the enhancement level.

*By pressing ¢or 4 , you can directly move as follows:

LOW LEVEL MID LEVELHI LEVEL

ENGLISH

1	5 Adjust the selected sound element.
	Press MODE to enter the functions

mode.

2 Press EQ (equalizer) while “MODE” is still on the display.

The last selected sound mode

is called up.

3 Select the sound mode you want to adjust.

Indication		Preset values
	LOW			MID		HI
LEVEL	–06 (min.)		–06 (min.)		–06 (min.)
	+06 (max.)		+06 (max.)		+06 (max.)
FREQ.	60Hz				8kHz
	80Hz				10kHz
	100Hz				12kHz
	120Hz				15kHz
WIDTH	1 (min.)		1 (min.)
	4 (max.)		2 (max.)

Ex.: When you select “JAZZ”

4 Select sound elements to adjust.

Each time you press the button, the sound elements

change as follows:

6 Repeat steps 4 and 5 to adjust the other sound elements.7 Select one of the user sound modes (USER 1, USER 2, USER 3).

LOW LEVEL* =LOW FREQ =LOW WIDTH	8 Press EQ to store the adjustments.
=MID LEVEL* =MID WIDTH
=HI (high) LEVEL* =HI (high) FREQ	“MEMORY” appears for a
=(back to the beginning)	while.

25