30
ENGLISH

Basic procedure

You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1 Enter the PSM menu (see page
5).
2 Select a PSM item.
Ex.: When “Dimmer” is selected
General settings — PSM
3 Adjust the setting.
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the procedure.
Indications Selectable settings, [reference page]
Demo/Link
Display
demonstration
Demo: [Initial]; Display demonstration (animation) and
playback source indication appears alternately.
Image Link: To show a still image while playing back an
MP3/WMA track, [13, 15, 48].
Off: Cancels.
• These graphics appear if no operation is done for about 20 seconds.
Pict
Pictures
You can activate the graphic screen using either movie or picture, [29].
Picture: [Initial]; One of your edited still images stored in
“Picture” is activated.
Movie: Your edited animation stored in “Movie” is activated.
Slideshow: Your edited still images stored in “Slide” are activated
and shown in sequence.
KeyIn CFM
Key-in confirmation
On: [Initial]; An animation screen appears when you turn on or off the
power and select an i-EQ.
Off: Cancels.
EN26-31_KD-AR960[J]4.indd 30EN26-31_KD-AR960[J]4.indd 30 12/15/04 5:10:20 PM12/15/04 5:10:20 PM