iPod playbackCD changerAV-IN DAB tuner

Symptoms

Remedies/Causes

• The iPod does not turn on or does not work.

• Check the connecting cable and its connection.

 

• Charge the battery.

• The sound is distorted.

Deactivate the equalizer either on this unit or the iPod.

• “Disconnect” appears on the monitor.

Check the connecting cable and its connection.

• Playback stops.

The headphones are disconnected during playback. Restart

 

playback.

• “No Files” appears on the monitor.

No tracks are stored. Import tracks to the iPod.

• “Reset 01” – “Reset 07” appears on the

Disconnect the adapter from both this unit and iPod. Then,

monitor.

connect them again.

• “Reset 08” appears on the monitor.

Check the connection between the adapter and this unit.

• The iPod’s controls do not work after

Reset the iPod.

disconnecting from this unit.

 

• “Restricted Device” appears on the monitor.

Check whether the connected iPod is compatible with this

 

unit. (☞page 59)

• No operations are available while playing

Operate the unit after the artwork is loaded. (☞page 59)

back a track containing artwork.

 

• “No Disc” appears on the monitor.

Insert a disc into the magazine.

• “No Magazine” appears on the monitor.

Insert the magazine.

• “Cannot play this disc Check the disc” appears

Disc does not include playable files. Replace the disc with

on the monitor.

playable files.

• “Reset 08” appears on the monitor.

Connect this unit and the CD changer correctly and press

 

the reset button of the CD changer.

• “Reset 01” – “Reset 07” appears on the

Press the reset button of the CD changer.

monitor.

 

• The CD changer does not work at all.

Reset the unit. (☞page 3)

• “No DAB Signal” appears on the monitor.

Move to an area with stronger signals.

• “Reset 08” appears on the monitor.

Connect this unit and the DAB tuner correctly, then reset

 

the unit. (☞page 3)

• The DAB tuner does not work at all.

Connect this unit and the DAB tuner correctly, then reset

 

the unit. (☞page 3)

• “Antenna Power NG” appears on the monitor.

Check the cords and connections.

• No picture appears on the monitor.

• Turn on the video component if it is not on.

 

• This unit is not connected to the video component

 

correctly. Connect it correctly.

• The playback picture is not clear and legible.

Adjust items in <Picture Adjust>. (☞page 49)

ENGLISH

65REFERENCES