ENGLISH

Using menu driven features... (DVD-Video/ DVD-VR)

1Press TOP M/MENU to enter the menu screen.

2 Press %/fi/@/#to select an item you want to start play.

3 Press ENT (enter) to confirm.

Canceling the PBC playback... (VCD)

1During stop, press DIRECT while holding SHIFT.

2 Hold SHIFT, then press the number buttons (0 – 9) to enter the desired number.

3 Press ENT (enter) to confirm.

• To resume PBC, press TOP M/MENU.

Operations using the on-screen bar

(DVD/DVD-VR/DivX/MPEG Video/VCD)

These operations are possible on the monitor using the remote controller.

1Show the on-screen bar (see page 19). (twice)

2Select an item.

3Make a selection.

If pop-up menu appears...

•To cancel pop-up menu, press RETURN.

•For entering time/numbers, see the following.

Entering time/numbers

Press %/fito change the number, then press @/#to move to the next entry.

•Each time you press %/fi, the number increases/ decreases by one value.

•After entering the numbers, press ENT (enter).

•It is not required to enter the zero and tailing zeros (the last two digits in the example below).

Ex.: Time search

DVD: _:_ _:_ _ (Ex.: 1:02:00)

Press %once, then #twice to go to the third entry, % twice, then press ENT (enter).

To remove the on-screen bar

18