WARNINGS:

To prevent accidents and damage

DO NOT install any unit in locations where;

it may obstruct the steering wheel and gearshift lever operations.

it may obstruct the operation of safety devices such as air bags.

it may obstruct visibility.

DO NOT operate the unit while driving.

If you need to operate the unit while driving, be sure to look ahead carefully.

The driver must not watch the monitor while driving.

If the parking brake is not engaged, “DRIVER MUST NOT WATCH THE MONITOR WHILE DRIVING.” appears on the monitor, and no playback picture will be shown.

This warning appears only when the parking brake wire is connected to the parking brake system built in the car (refer to the Installation/ Connection Manual).

For safety...

Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.

Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

CONTENTS

 

Introduction.............................................

4

OPERATIONS

 

Basic operations

 

• Control panel..........................................

6

• Remote controller (RM-RK230) ................

7

Listening to the radio ................................

10

Searching for FM RDS programmes

 

— PTY Search .......................................

11

Disc operations.........................................

13

EXTERNAL DEVICES

 

Listening to the USB memory .....................

21

Listening to the CD changer .......................

22

Listening to the DAB tuner.........................

23

Listening to the iPod®/D. player .................

24

Listening to the other external

 

components..........................................

25

Dual Zone operations ................................

26

SETTINGS

 

Selecting a preset sound mode...................

27

General settings — PSM ...........................

28

Disc setup menu........................................

31

Assigning names to the sources..................

33

Maintenance ............................................

34

More about this unit .................................

35

Troubleshooting .......................................

40

Specifications ...........................................

44

ENGLISH

3