Before operating the unit — Cancel the display demonstration and set the clock

• See also page 29.

When the power is turned off: Check the current clock time

When the power is turned on: Change the display information

~Turn on the power.ŸEnter the PSM settings.!]⁄ Cancel the display demonstrations

Select “DEMO,” then “DEMO OFF.”

Set the clock

Select “CLOCK H” (hour), then adjust the hour.

Select “CLOCK M” (minute), then adjust the minute.

Select “24H/12H,” then “24H” (hour) or “12H” (hour).

@Finish the procedure.How to detach/attach the control panel

Detaching...Attaching...

Lever

CAUTION:

The lever comes out if you pressed the 0 button while the panel is detached. If this happens, push the lever back into lock position before attaching the panel.

ENGLISH

5