iPod® or D. player

 

Disc setup menu

•When you turn on this unit, the iPod or D. player is charged through this unit.

•While the iPod or D. player is connected, all operations from the iPod or D. player are disabled. Perform all operations from this unit.

•The text information may not be displayed correctly.

•If the text information includes more than 8 characters, it scrolls on the display (see also page 30). This unit can display up to 40 characters.

Notice:

When operating an iPod or a D. player, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site:

For iPod users: <http://www.jvc.co.jp/ english/car/support/ks-pd100/index.html>

For D. player users: <http://www.jvc.co.jp/ english/car/support/ks-pd500/index.html>

•When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming.

•When you select “16:9” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.

•Even if “4:3 PAN SCAN” is selected, the screen size may become “4:3 LETTER BOX” for some discs.

About sounds reproduced through the rear terminals

•Through the analog terminals (Speaker out/LINE OUT/2nd AUDIO OUT):

2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. (AUDIO—DOWN MIX: see page 32.)

ENGLISH

Title assignment

•If you try to assign titles to more than 30 CDs, “NAMEFULL” appears. Delete unwanted titles before assignment.

•Titles assigned to CDs in the CD changer can also be shown if you play back the disc from the unit and vice versa.

General settings—PSM

•If you change the “AMP GAIN” setting from “HIGH PWR” to “LOW PWR” while the volume level is set higher than “VOL 30,” the unit automatically changes the volume level to “VOL 30.”

37

•Through DIGITAL OUT (optical): Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this terminal. (For more details, see page 38.)

To reproduce multi-channel sounds such as Dolby Digital and DTS, connect an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set “DIGITAL AUDIO OUTPUT” correctly. (See page 32.)

•About Dual Zone:

Through the 2nd AUDIO OUT, 2-channel signal is emitted. When playing a multi- channel encoded disc, multi-channel signals are downmixed. (See page 26.)

Continued on the next page