ENGLISH

Indication, [Range]

BASS *1, [–06 to +06]
Adjust the bass.

MIDDLE *1 (mid-range), [–06 to +06] Adjust the mid-range frequencies sound level.

TREBLE *1, [–06 to +06]
Adjust the treble.
FADER *2, [R06 to F06]
Adjust the front and rear speaker balance.
BALANCE *3, [L06 to R06]
Adjust the left and right speaker balance.

LOUD *4 (loudness), [LOUD ON or LOUD OFF] Boost low and high frequencies to produce a well-balanced sound at a low volume level.

SUB.W*5, [00 to 08, initial: 04]
Adjust the subwoofer output level.

VOL ADJ (volume adjust), [–05 to +05, initial: 00] Adjust the volume level of each source (except FM), in relation to the FM volume level. The volume level will automatically increase or decrease when you change the source.

•Before making an adjustment, select the source you want to adjust.
VOLUME, [00 to 50 or 00 to 30] *6
Adjust the volume.

*1 When you adjust the bass, mid-range, or treble, the adjustment you have made is stored for the currently selected sound mode (iEQ) including “USER.”

*2 If you are using a two-speaker system, set the fader level to “00.”

*3 This adjustment will not affect the subwoofer output. *4 The adjustment made (LOUD ON/LOUD OFF) will be

applied to all sound modes.
*5 Displayed only when “L/O MODE” is set to “SUB.W” (see page 13).
*6 Depending on the amplifier gain control setting. (See page 14 for details.)
General settings — PSM

You can change PSM (Preferred Setting Mode) items listed in the table on pages 13 and 14.

1

2Select a PSM item.

3Adjust the PSM item selected.

4Repeat steps 2 and 3 to adjust other PSM items if necessary.

5Finish the procedure.

12