Remote controller — RM-RK50

 

Main elements and features

 

 

 

Installing the lithium coin battery (CR2025)

ENGLISH

For USA-California Only:

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between.

Warning:

Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.

Do not leave the remote controller in a place (such as the dashboard) exposed to direct sunlight for a long time; otherwise, it may explode.

Store the battery in a place where children cannot reach to avoid the risk of accidents.

To prevent the battery from over-heating, cracking, or starting a fire:

Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.

Do not leave the battery with other metallic materials.Do not poke the battery with tweezers or similar tools.Wrap the battery with tape and insulate when throwing away or saving it.
1 (standby/on/attenuator) button

Turns the power on if pressed briefly or attenuates the sound when the power is on.

Turns the power off if pressed and held. 2 5U (up) / D (down) buttonsChanges the FM/AM bands with 5U.Changes the preset stations with D .Changes the folder of the MP3/WMA.3VOL – / VOL + buttonsAdjusts the volume level. 4 SOUND buttonSelects the sound mode (iEQ: intelligent equalizer).5SOURCE button• Selects the source.62R (reverse) / F (forward) 3buttonsSearches for stations if pressed briefly.Fast-forwards or reverses the track if pressed and held.Changes the track if pressed briefly.

5