ENGLISH
| TA Standby Reception | Indicator | PTY Standby Reception | Indicator | |
|
|
|
|
|
Press | to activate. |
| See page 26. |
|
|
|
|
| |
The unit temporarily will switch to Traffic | Lights up | The unit temporarily will switch to your | Lights up | |
Announcement (TA), if available, from any |
| favorite PTY programme from any source |
| |
source other than AM and FM3*. |
| other than AM and FM3*. |
| |
The volume changes to the preset TA |
|
|
| |
volume level if the current level is lower |
|
|
| |
than the preset level (see page 26). |
|
|
| |
|
|
|
| |
Not yet activated. Tune in to another | Flashes | Not yet activated. Tune in to another | Flashes | |
station providing the RDS signals. |
| station providing the RDS signals. |
| |
|
|
|
|
|
Press | to deactivate. | Goes off | Select “OFF” for the PTY code (see page 26) | Goes off |
|
|
| to deactivate. |
|
|
|
|
|
|
•When a DAB tuner is connected, TA/PTY Standby Reception also searches for services. (See also pages 20 and 26.) * The unit will not switch to Traffic Announcement or PTY programme when a call connection is established through the
When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration on the right).
To change the
setting, see
•When the DAB tuner is connected, refer to “Tracing the same
Programme A broadcasting on different frequency areas (01 – 05)
Usually when you press the number buttons, the preset station is tuned in.
If the signals from the FM RDS preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the same programme as the original preset station is broadcasting.
•The unit takes some time to tune in to another station using programme search.
•See also page 26.
10