JVC KD-G737 To search for available devices, To connect a special device, To delete a registered device, Select, 1Select “SEARCH.”, 1Select “SPECIAL.”

5Use the Bluetooth device to search and connect.

On the device to be connected, enter the same PIN code you have just entered for this unit. “CONNECT” flashes on the display.

Now connection is established and you can use the device through the unit.

The device remains registered even after you disconnect the device. Use “CONNECT“ (or activate “AUTO CNT”) to connect the same device from next time. (See the right column and page 28.)

2Select a device you want to connect.

3Use “OPEN’ or “SEARCH’ to connect.

To connect/disconnect a registered device

1Select “BT-PHONE” or “BT-AUDIO.”

ENGLISH

To search for available devices

Perform steps 1 and 2 on page 14, then...

1Select “SEARCH.”

The unit searches and displays the list of the available devices.

•If no available device is detected, “UNFOUND” appears.

2Select a device you want to connect.

3Enter the specific PIN code of the device to the unit.

•Refer to the instructions supplied with the device to check the PIN code.

4Use the Bluetooth device to connect.

Now connection is established and you can use the device through the unit.

To connect a special device

Perform steps 1 and 2 on page 14, then...

1Select “SPECIAL.”

The unit displays the list of the preset devices.

2Select a registered device you want to connect/disconnect.

3Select “CONNECT” or “DISCNNCT” to connect/ disconnect the selected device.

You can set the unit to connect a Bluetooth device automatically when the unit is turned on. (See “AUTO CNT” on page 28.)

To delete a registered device

1Select “BT-PHONE” or “BT-AUDIO.”

2Select a registered device you want to delete.

3Select “DELETE,” then “YES” to delete the selected device.

EXTERNAL DEVICES 15