JVC KD-LH305 manual When an FM stereo broadcast is hard to receive, English

3 Tune in to a station you want while “Manual Search” is flashing.

To tune in to stations of higher frequencies

To tune in to stations of lower frequencies

•If you release your finger from the button, the manual mode automatically turns off after about 5 seconds.

•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz for AM) until you release the button.

When an FM stereo broadcast is hard to receive:

Set the FM reception mode to “Mono On.”

1Press M MODE while listening to an FM stereo broadcast.

“Mode” appears on the display. The next-step-operation buttons start flashing.

2Press number button 1 to select “Mono On” while “Mode” is still on the display.

Each time you press the button, “Mono On” or “Mono Off” appears alternately.

ENGLISH

If the sound quality decreases and the stereo effect is lost while listening to an FM station

In some areas, adjacent stations may interfere with each other. If this interference occurs, this unit can automatically reduce this interference noise (the initial setting when shipped from the factory). However, in this case, the sound quality will be degraded and the stereo effect will also be lost.

If you do not want to degrade the sound quality and to lose the stereo effect, rather than to eliminate the interference noise, see “To change the FM tuner selectivity—IF Filter” on page 39.

After about 5 seconds

The display returns to the source indication screen.

MONO indicator appears.

The sound you hear becomes monaural but the reception will be improved.

11