ENGLISH
Storing DAB services in memory
You can preset up to 6 DAB services in each DAB band (DAB1, DAB2, and DAB3) manually.
Before you start....
Press FM/AM (DAB) briefly if CD, CD changer, or external component is the current source.
1 Select the DAB tuner.
Each time you press and hold the button, the DAB tuner and the FM/AM tuner are alternately selected.
4 Select a service of the ensemble you want to listen to.
Press 5 (up) to select the next service.
Press ∞ (down) to select the previous service.
5 Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds.
DAB 
FM/AM
2 Select the DAB band (DAB1, DAB2, or DAB3) you want.
Each time you press the
button, the DAB band changes
as follows:
Selected band/preset number and “MEMO”
(memory) appear alternately for a while.
| DAB 1 |
| DAB 2 |
| DAB 3 |
|
| (D1) |
| (D2) |
| (D3) | |
|
|
|
|
|
|
|
3 Tune in to an ensemble you want.
6 Repeat the above procedure to store other DAB services into other preset numbers.
Notes:
•You can only preset primary DAB services. If you store a secondary service, its primary service will be stored instead.
•A previously preset DAB service is erased when a new DAB service is stored in the same preset number.
•Preset DAB services are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the DAB services again.
46
