TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

 

 

 

Symptoms

Causes

 

Remedies

 

 

 

 

 

 

 

 

Sound cannot be heard

The volume level is set to the

Adjust it to the optimum level.

 

 

 

 

 

from the speakers.

minimum level.

 

 

 

 

 

 

 

 

 

 

 

 

 

Connections are incorrect.

Check the cords and

General

 

 

 

 

connections.

 

 

 

 

 

 

 

 

at all.

have functioned incorrectly due

press

(standby/on/

 

 

This unit does not work

The built-in microcomputer may

While holding SEL (select),

 

 

 

 

to noise, etc.

 

 

 

 

 

 

attenuator) for more than 2

 

 

 

 

 

seconds to reset the unit. (The

 

 

 

 

 

clock setting and preset stations

 

 

 

 

 

stored in memory are erased.)

 

 

 

 

 

(See page 2.)

 

 

 

 

 

 

 

 

 

SSM (Strong-station

Signals are too weak.

Store stations manually.

 

 

FM/AM

 

 

Sequential Memory)

 

 

 

 

 

 

automatic preset does

 

 

 

 

 

 

 

 

 

 

 

 

 

 

not work.

 

 

 

 

 

 

 

 

 

 

 

 

Static noise while

The aerial is not connected

Connect the aerial firmly.

 

 

 

listening to the radio.

firmly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disc cannot be played

Disc is inserted upside down.

Insert the disc correctly.

 

 

 

 

 

back.

 

 

 

 

 

 

 

 

 

 

 

CD-R/CD-RW cannot be

CD-R/CD-RW is not finalized.

• Insert a finalized CD-R/

 

 

 

played back.

 

CD-RW.

 

 

 

• Tracks on the CD-R/CD-

 

• Finalize the CD-R/CD-RW

 

 

 

RW cannot be skipped.

 

with the component which

 

 

 

 

 

you used for recording.

Playback

 

 

 

 

 

 

 

Disc cannot be ejected.

Disc is locked.

Unlock the disc.

 

 

Disc sound is sometimes

You are driving on rough roads.

Stop playback while driving on

 

 

 

 

 

(See page 23.)

 

Disc

 

 

interrupted.

 

rough roads.

 

 

 

 

 

 

 

 

 

 

 

Disc is scratched.

Change the disc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connections are incorrect.

Check the cords and

 

 

 

 

 

connections.

 

 

 

 

 

 

 

 

 

“NO DISC” appears on

No disc in the loading slot.

Insert a disc into the loading

 

 

 

the display.

 

slot.

 

 

 

 

 

 

 

 

 

 

 

Disc is inserted incorrectly.

Insert the disc correctly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENGLISH

49

Page 49
Image 49
JVC KD-LH70R manual Troubleshooting, Symptoms Causes Remedies, Stored in memory are erased, Disc