Searching a station manually: Manual search

Searching a station manually: Manual search

1- 1 MONO 1- 3 1- 2MODE 2, 3

ENGLISH

1 1 2 3

Tune into a station you want while “M” FM1 is flashing. FM2 When an FM stereo broadcast is hard to receive: FM3 Manual background AM

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

Select the band.

1Press FUNC (Function) to select “FM” or “AM.”

2Press MODE.

“MODE” appears on the lower part of the display.

3Press BAND to select the band.

Each time you press the button, the band changes as shown to the left:

2

Press and hold Manual background ¢ or 4 Manual background until “M” (manual) starts flashing on the display.

3

 

To tune into stations

 

 

 

of higher frequencies

Tune into a station you want while “M”

 

 

To tune into stations

is flashing.

 

 

 

 

of lower frequencies

 

Notes:

If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM–MW/LW) until you release the button.

After 5 seconds you release the button, “M” stops flashing on the display and you cannot select a station manually any more.

When an FM stereo broadcast is hard to receive:

1 Press MODE while listening to an FM stereo broadcast (the ST indicator lights up while receiving an FM stereo broadcast).

“MODE” appears on the lower part of the display.

2 Press MONO (monaural), while “MODE” is still on the display, so that the MO indicator lights up on the display.

The sound you hear becomes monaural but reception will be improved (the ST indicator goes off).

Each time you press the button, the MO indicator lights up and goes off alternately.

7

Page 7
Image 7
JVC KD-LX3R manual Tune into a station you want while “M”, is flashing, Select the band, English, FM1 FM2 FM3 AM